Confidently Walking Scootaloo
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.73 – €5.78 net (excluding VAT)
For file: scootaloo_02mm_pla_mk3s_6h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.25 excluding VAT (range midpoint).
- Weight reported by the author
- 46 g
- Print time reported by the author
- 6.2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Scootaloo, just walking around. (My Little Pony fanart.)
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 260
- Makes
- 6
- Views
- 880
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution
Scootaloo, just walking around.
(My Little Pony fanart.)
Based on the drawing by xbi: https://www.deviantart.com/xbi/art/Everfree-Forest-Cmc-Scootaloo-Sweetie-Belle-Apple-828884645
Print instructions
The model comes in two variants: one with hair, one one without.
If you print the one without hair, you can for example glue on yarn as hair.
I have not tested the version without hair!
IMPORTANT
The center of gravity of this model is very close to the left side of the front leg.
Depending on your slicer settings, your finished print might not be able to stand!
To ensure that your print can stand:
- print the tail with higher infill (this is already done in the gcode and 3mf), and
- ensure good bed adhesion, so the hooves end up flat. (I did not have an issue with this, though.)
The version without mane and tail may not be able to stand at all.
However, you can glue it down or add a base if you want to.