Magicshine mount for Giro Montaro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These files are three different versions of a mount to attach a Magicshine LED light to a Giro Montaro helmet using…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 666
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
These files are three different versions of a mount to attach a Magicshine LED light to a Giro Montaro helmet using it's included GoPro mount. This may work for other helmets and LED Lights, YMMV.
Rev 3 is probably the version you'll want to use, it places the light closer to the helmet and gives the most adjustability.
Note I have posted a few other Magicshine to GoPro mount helmet adapters:
Giro Edit: http://www.thingiverse.com/thing:684331
Generic: http://www.thingiverse.com/thing:197074
Print instructions
Unassociated tags: LED light mount
Category: Sport & Outdoors Print Settings
Printer Brand: RepRap
Printer: MendelMax 1.5
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 70%
Notes:
I used 0.2mm layer height and 70% fill with ABS. These parts are designed to print without support. You'll have to rotate the parts to lay flat on your print bed, typically either + or - 90 degrees on the X axis.
How I Designed This
Designed using Solidworks 2016. I included both .STL files and the native Solidworks files for your remixing fun.