1 / 1
Derbi senda Euro 2 to KX85 Reed valve adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Converts KX85 reed valves to Derbi senda Euro 2 engines
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Hardware needed:
4 x M6 x 12 - 16mm HEX (10mm max head diameter)
4 x M6 x 20 - 25mm HEX (10mm max head diameter)
4 x M6 x 10 - 16mm (Can be any head, length needed will depend on your intake)
8 X M6 nut (5.20mm max height)
Notes:
I printed this in PLA and to my surprise it actually worked well. Avoid ABS, but ideally PET-CF or similar exotic materials would be preferred.
Keep in mind you need to mill out material in your engine to fit the larger reed valves. Big performance gains were made when I used this part a long time ago.
