Magnetic C170 Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6xfbJCmlQyr
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6xfbJCmlQyr
Print Settings
Printer:
Monoprice Maker Select V2.1
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
20%
Notes:
Printed in ABS with a large brim for sticktion. I wanted a tight fit between the cylinder part and the back of the camera, so you might need to file just a smidge there to get it to fit.
Added some 3mm magnets from the dollar store, secured with superglue. Lightly sanded the face that sticks to the metal plate to make sure the magnets were flush with the surface of the mount.The metal plate i used on my printer enclosure is a nailing plate from the deck building section of my local hardware store. Cost about $1.30
Category: 3D Printing