Liczymy pasujące modele…
The camera shaft fit is tight, it should be. If too tight enlarge with 3mm drill bit. Printed from ABS with 0.2mm layer. Print which material You like.
*Update I did not see that https://www.prusaprinters.org/social/1022-dsk001 Has a model named Millenium Enterprise and do not want to step on toes so I have renamed it the NCC1701-Falcon. So I had a thought and I wanted to see it happen…
Remix of https://www.thingiverse.com/thing:3353525 to fit the Ender 3 Pro Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .20 Infill: 30 Filament: Hatchbox PLA Category: 3D Printer Accessories
It's another camera mount for an Ender 3. This one has solid models so you can modify it.
. Print instructions Category: 3D Printer Accessories
Español: Soporte de webcam Logitech C170 para la Ender 3 Pro. Este soporte está modificado para que no choque con la cama caliente. (Ver fotos) English: Logitech C170 webcam support for the Ender 3 Pro. This support is modified so that it…
Just insert the webcam into the holder, it will push it down. No screws required, 1 single part, so easy :) Don't bend the "spring" too hard though, it might break. Add it to your gopro mounts and stick it to the printer. Voila! designed…
The small slit at the left edge of the camera opening allows to see the activity indicator without opening the slider. For the print, supports are necessary for the “Back” piece. Assembly Insert the slider into the indentation of the…
For the hardware I used 1 M3x10 screw and 2 M3x18 screws that were spare parts from my prusa i3 mk3 kit. If the holes are to small you can use 3/32 drill bit to clean them up. Link to the camera…
mount for Logitech C170 Webcam on CR10 i get it of ebay for 5$ Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Notes: just print it its easy print Post-Printing you will need extra…
I wanted to monitor two adjacent printers with one Octopi server, both with cameras. After getting them both working (an RPi camera and an old Logitech C170) I threw this remix together to allow for adjustability and length. The Octopi…
I broke the original mount on my logitech c170 and needed a simple replacement. you can easily remove the original mount by running a hacksaw between the gap at the camera end at the end with the blanking plate. I have used a round magnet…
Passend für: https://www.amazon.de/gp/product/B01BGBJ8XQ/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1 Category: Other
This is a stand for a Logitech C170 webcam with a magnetic base. Two heights are provided: 70 mm and 150 mm. It uses only the base a commonly available magnetic hook. A 10 mm M4 screw is needed to attach the holder to the magnetic base. A…
This is a Logitech c170 camera mount for the MP Select Mini. Each Link goes attached to the next one with M3 bolts and nuts. Any link can be attached to the camera using the little plastic rod that came with the camera hinge (or a 35mm M3…
This is a privacy shield that you put on your Logitech C170 webcam in order to block the lens and thus to ensure your privacy. It is sturdier than the previous design (…
Supporto per WebCam Logitech C170 minimale si aggancia al piano riscaldato incastrandolo sotto la vite e si fissa con dado e bullone per poterne regolare la distanza. Versione 1.0 Category: 3D Printer Accessories
Works with the Base (Basis) that can be found at https://www.thingiverse.com/thing:3816235 that was created by Writable . Other pieces from that thing can also be mixed with this. Works also with the Arm as found in Arlo Essential Camera…
Printed in PETG with supports
This is a privacy shield that you put on your Logitech C170 webcam in order to block the lens and thus to ensure your privacy. Print Settings Rafts: Doesn't Matter Supports: No Infill: 100%
Semplice piccola staffa montare la webcam logitech C170 a destra del piano di stampa Category: 3D Printer Accessories
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6xfbJCmlQyr Print Settings Printer: Monoprice Maker Select V2.1 Rafts: No Supports: Yes Resolution: .2 Infill: 20% Notes: Printed in ABS with a large brim…
This bracket is for a Logitech webcam C170 / C270 or similar Especially for mounting on a 20x20mm aluminum frame The webcam is mounted 45 degrees to the aluminum frame Slide the webcam into the holder from the side
Another Great Model found over at the 3D Warehouse ; ) I've split it up with the intent to print it at some stage. Otherwise the original is listed here also, if you'd like to slice it yourself Print instructions Category: 3D Printing Tests
Why this? Following my project of producing 2d images in colour I am turning my attention to printing 3d coloured objects with an MMU2S. This model is a “proof of concept” to demonstrate the possibilities using the palette available using…
