Artemis II Earthset Hueforge

This is a 100mmx150mm Hueforge type photo of Earthset from the NASA Artemis II mission made with https://tool.itslitho.com/CreateModel

The print is currently set up with color switching and an AMS but can be done with manual switches as well. 

Current print settings are for a 0.4mm Nozzle with 0.08mm Layer Height. there is 1 pause included to switch over two filaments for an AMS. If you have a 0.2mm nozzle dialed in, I would recommend reducing the z scale and printing at a 0.06mm layer height for best results.

Six colors were used with 6 switches:

• Black - 0.00mm to 0.68mm

• Dark Gray - 0.68mm to 1.24mm

• Light Gray - 1.24mm to 1.64mm

• White - 1.64mm to 2.04mm

• Blue - 2.04mm to 2.52mm

• Light Blue - 2.52mm to 2.84mm

• White - 2.84mm to 3.00mm

The two blues are not the most necessary and bleeds just a bit onto the moon. if you want to print it with 4 change the blue and light blue to dark gray and light gray. 

For materials I used what I had (Mattes and a Silk), but Basic will give better transparency between layers. 

“I have two versions of outlook and neither of them are working” - Captain Reid Wiseman, Artemis II