Artemis II Earthset Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 100mmx150mm Hueforge type photo of Earthset from the NASA Artemis II mission
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 24
- Makes
- 0
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
This is a 100mmx150mm Hueforge type photo of Earthset from the NASA Artemis II mission made with https://tool.itslitho.com/CreateModel
The print is currently set up with color switching and an AMS but can be done with manual switches as well.
Current print settings are for a 0.4mm Nozzle with 0.08mm Layer Height. there is 1 pause included to switch over two filaments for an AMS. If you have a 0.2mm nozzle dialed in, I would recommend reducing the z scale and printing at a 0.06mm layer height for best results.
Six colors were used with 6 switches:
Black - 0.00mm to 0.68mm
Dark Gray - 0.68mm to 1.24mm
Light Gray - 1.24mm to 1.64mm
White - 1.64mm to 2.04mm
Blue - 2.04mm to 2.52mm
Light Blue - 2.52mm to 2.84mm
White - 2.84mm to 3.00mm
The two blues are not the most necessary and bleeds just a bit onto the moon. if you want to print it with 4 change the blue and light blue to dark gray and light gray.
For materials I used what I had (Mattes and a Silk), but Basic will give better transparency between layers.
“I have two versions of outlook and neither of them are working” - Captain Reid Wiseman, Artemis II