Philips Hue cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Philips hue bridge got crazy stong LEDs and you should not cover them with tape since they also act as air vents. I…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 75
- Wydruki
- 2
- Wyświetlenia
- 1542
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Philips hue bridge got crazy stong LEDs and you should not cover them with tape since they also act as air vents. I therefore designed this cover that make sure no light leak out, but still gives the hue a ≈2mm gap where hot air can leak out and then mix with the atmosphere through 2 small holes in the top and a gap in the back above the Ethernet and power cable. I have used this for a few months and everything seem to work as intended. Use on your own risk.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.30
Infill:
15%
Filament: Prusa PLA Black
Notes:
Speed setting on prusa 0.6mm nozzle, took 1h to print
Category: Household