Improved Filament Guide (Anet A8)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was tired of the different filament guide designs here for the Anet A8. They either slide around and fall off, or…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I was tired of the different filament guide designs here for the Anet A8. They either slide around and fall off, or they have a too small hole for the filament and it runs hard through the loop in certain angles. This one is secured by a screw (also used for the screen, stock screw work, no need to get longer screw), wont go anywhere, also has a better loop for the filament.
You can remix, share, sell, use etc. with this design. But remember to give me a shutout if you do.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
Yes
Resolution:
0.4 (0.8mm nozzle)
Infill:
100%
Filament: China PLA White
Notes:
I used 0.8 mm nozzle, it worked but not the best finish. It is best to place what will be to the front of the printer upwards. That way it will get a better surface finish.
Category: 3D Printer Parts