Contractable Book Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A foldable, magnetic 3D-printed stand with phone & cup holders. Designed to look and store like a real book.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
The Contractable Book Holder is a folding 3D-printed station that supports 1,000-page books while organizing your phone, pen, and mug. Its "closed book" design uses hidden hinges and magnets to fold flat for easy bookshelf storage.
Build Instructions
Prep: Clear the support material from the honeycomb faces and the internal drawer slot.
Hinges: Secure hinges into the base slots using heat-set inserts. https://www.amazon.com/dp/B08MVPPCVD?ref=ppx_yo2ov_dt_b_fed_asin_title
Magnets: Press-fit or glue magnets into the top circular recesses. Note: Verify polarity so the sides snap together when closed. https://www.amazon.com/dp/B0FG7QHHRD?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Drawer: Slide the accessory drawer into the side track. It is designed with a 0.3mm tolerance for a smooth fit.
Print Tips
Material: PLA (for rigidity) or PETG (for durability).
Settings: 0.28mm layer height, 10% Grid infill.
Orientation: Print the main "Bookmark" frame on its side to maximize bed adhesion.
Supports: Use Tree/Organic supports for the honeycomb patterns to save material and ensure a cleaner surface finish.