Giro Montaro visor screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a M5 screw to replace the visor screw in a Giro Montaro.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 107
- Wydruki
- 3
- Wyświetlenia
- 833
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a M5 screw to replace the visor screw in a Giro Montaro. (probably works in other Giro helmets as well)
Rotate on your print platform to print screw head down.
Print, then use a M5 tap or M5 nut to cut threads in the shaft. You may also be able to directly screw it into your helmet. I used a M5 tap and it seems to work fine. It seems slightly loose- if this falls out I'll try just screwing it into the helmet and see what happens.
The solidworks file is included for your remixing fun.
Print instructions
Unassociated tags: Giro Montaro, giro visor screw, visor screw
Category: Sport & Outdoors Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: Yes
Supports: No
Resolution: 0.15
Infill: 80%
Notes:
I printed in eSUN PLA+. I printed using a raft but it is probably not required if you have good bed adhesion.