Giro Montaro visor screw
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a M5 screw to replace the visor screw in a Giro Montaro.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 107
- Makes
- 3
- Views
- 833
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This is a M5 screw to replace the visor screw in a Giro Montaro. (probably works in other Giro helmets as well)
Rotate on your print platform to print screw head down.
Print, then use a M5 tap or M5 nut to cut threads in the shaft. You may also be able to directly screw it into your helmet. I used a M5 tap and it seems to work fine. It seems slightly loose- if this falls out I'll try just screwing it into the helmet and see what happens.
The solidworks file is included for your remixing fun.
Print instructions
Unassociated tags: Giro Montaro, giro visor screw, visor screw
Category: Sport & Outdoors Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: Yes
Supports: No
Resolution: 0.15
Infill: 80%
Notes:
I printed in eSUN PLA+. I printed using a raft but it is probably not required if you have good bed adhesion.