Counting matching models…
Update 2 Arachne not working well in this model, change to classic in slicer settings Update 1 Repaired the base of the model Download my others models here NO SUPPORTS NEEDED Simple and easy-to-print vase for minimalist decorations with…
Nuevas versiones del mate giroide. Una version de finas lineas y otra de forma de panal. actualizacion v4.0: nuevo encastre conico
Giro fidget in a different way, this time in the shape of a rope The tolerance of the parts is 0.4, it rotates easily and freely. Many other spinners and fidgets are in this collection:…
DESCRIPCIÓN DEL MODELO 3D Llavero simple con función giroscópica. PARÁMETROS DE IMPRESIÓN 3D Plástico: PLA Soporte: Si Alto de Capa: 0.2 Temperatura Nozzle: 205°c Temperatura Cama: 70°c Relleno: 0%
En este stl van a encontrar el ya clasico Mate Giroscopio pero esta vez todo cerrado y con un mejor agarre.
Gear giro fidget Modeled after the Tire giro fidget model, I created this geared giro fidget The diameter of the model is 63mm and the height is 24mm, the inner hole is 20mm. The tolerance between the rings is 0.4mm. Tire giro fidget :…
GIRO - Bed Leveling Wheel / Thumb Nut General This is a newly designed Bed Leveling Knob for several 3D printers. It uses a M3 thumb nut for M3 screws. If your Heatbed doesn't use M3 screws than this bed leveling wheel can't be used.The…
GIRO.HUE - Hue Play Light Bar VESA 75 / 80 /100 Mount General This bracket was designed to mount the Philips Hue Play Light Bar onto a VESA 75 / 80 / 100 mounting option. I used the VESA 100 for my Ergotron LX Monitor Arm. You might need…
This is a replacement goggle strap retainer clip for Giro snow helmets. The tab on the left is a little shorter than the tab on the right. When installing the clip onto your helmet, squeeze the bottom of the clip and insert the right side…
Source: https://www.models-resource.com/mobile/pokemonhome/model/54439/
GIRO.remix - BLTouch Mount General This is a remix of paul0's BLTouch mount for the TEVO Tarantula. This BLTouch mount must be mounted infront of the 40mm fan. Also be clear to mount the metal pin of the BLTouch exactly on the same…
Regirock STL came from https://www.thingiverse.com/thing:3019610/files
3D Printed Can Holder. Perfect for keeping your drinks safe and handy anywhere. Thanks to its gyroscopic design, your can will never fall over again!🍻✨ Ideal for the beach, the mountains, or the pool. Enjoy the summer without worries!🌴☀…
This is a M5 screw to replace the visor screw in a Giro Montaro. (probably works in other Giro helmets as well) Rotate on your print platform to print screw head down. Print, then use a M5 tap or M5 nut to cut threads in the shaft. You…
GIRO.remix - BLTouch Mount General This is a remix of paul0's BLTouch mount for the TEVO Tarantula. This BLTouch mount must be mounted infront of the 30mm fan of the Chimera hotend. You might need longer M3 screws to mount it but the…
GIRO.HUE - Play Light Bar Mount General This bracket was designed to be mounted on back of the Philips Hue Play Lightbar Mount. You will not need additional screws, nuts or washers. But if you lost the regular screw which comes included…
GIRO - 60mm Fan Cover / Fan Guard General This is a simple fan cover I created for my printer which uses a 60x60x25mm cooling fan for the mainboard. This fan cover needs four M4 screws and four M4 nuts. These are neccessary to mount it…
Representación física de un sistema de orientación dextrógiro (o regla de la mano derecha), muy útil para guiar cualquier problema de física o robótica. Al realizar la compra se recibe lo siguiente: Archivo del modelo 3D del sistema…
In the settings 0.32 at first layer and at the rest 0.12, the first change layer from red to white is at layer 41, the second change from white to yellow is at layer 58. You can do it in one color or in different colors if you want.
GIRO.HUE - Motion Sensor Wall Mount General This bracket was designed to be mounted with the original magnet and screw provided by Philips. The wall mount can be rotated by the middle section and the arm can be adjusted lineary due to a…
Giroscópio com base de suporte 100% funcional
Matches this male portion: https://elementrimming.com/products/itw-nexus-16mm-5-8-pom-helmet-side-release-buckle-a9hsb-1 Works for Giro Tremor helmets (and others) Printed in PETG with supports
GIRO - Full Graphic Smart Controller Knob General This is not an actual remix of the original design made by mightynozzle . This is a completely new designed knob for the Full Graphic Smart Controller case which was made by mightynozzle.…
GIRO - TEVO Tarantula / Y-Axis Motor Mount General This Nema17 stepper motor bracket was designed to improve the Y-Axis movement by reducing the friction of the idlers due to the fact that if you want to tension your system properly then…
Replacement ratchet strap for certain Giro bike shoes. Giro Privateer and N-2 both use this strap but others may use it as well. Recommend using TPU for the but PETG might have enough flexibility as well. Recommend 0.2mm or lower layer…
This is a cool practice I made in Fusion 360 for a fast printing fidget toy. My nephew loved it, and its an excellent gift for showing 3D printing capabilities. You can make it looser by grinding the little joints against each other, or…
GIRO.remix - OctoPrint Raspberry Pi Camera Mount General This is a remix of parkis' nicely designed Raspberry Pi Camera Mount for the Prusa i3. I nearly completely redesigned it to make it fit on my 3D printer with a different camera. The…
GIRO.ETS - 608 Ball Bearing Z-Rod Stabilisation General This bracket was designed to be mounted on the Z-Axis of the Eryone Thinker S and uses 608 ball bearings. This bracket stabilises the Z-Rod and helps to strengthen the frame of the…
This 3-axis right-handed system is ideal for better spatial representation perspective and right-hand ruler. Very useful for solving robotics problems. Contains the STL file of the right-handed system.
GIRO - Endstop Bracket General This endstop bracket is designed for the Y-Axis of the TEVO Tarantula. It is especially designed for those of you which are using the carbon Y-Axis carriage by Mackers or the aluminium Y-Axis carriage by…
GIRO - 608 Ball Bearing Y-Axis Idler General This idler was designed to be mounted on the Y-Axis of the TEVO Tarantula and uses 608 ball bearings. This idler is also usable for other printers with a 4020 extrusion profile as an axis.…
This is an adapter that allows you to mount a Magicshine LED headlamp to the gopro mount included with a Giro EDIT helmet. It would probably work for most similar helmet mounts. This mount places the light higher and closer in than my…
GIRO - TEVO Tarantula / 608 Ball Bearing X-Axis Idler General This idler was designed to be mounted on the X-Axis of the TEVO Tarantula and uses 608 ball bearings. This idler is also usable for other printers with a 4020 extrusion profile…
GIRO - 626 Ball Bearing X-Axis Idler General This idler was designed to be mounted on the X-Axis of the TEVO Tarantula and uses 626 ball bearings. This idler is also usable for other printers with a 4020 extrusion profile as an axis.…
Indicador de giro para extrusora, hacen falta dos imanes de 8 mm de diámetro por 3 mm de alto, o un solo imán de 8 mm de diámetro y 6 mm de alto.
These files are three different versions of a mount to attach a Magicshine LED light to a Giro Montaro helmet using it's included GoPro mount. This may work for other helmets and LED Lights, YMMV. Rev 3 is probably the version you'll want…
Chin mounts for Giro Discple helmet to gopro style camera mount. This was made from a scan of the helmet so the contour matches very well. I recommend printing these in PETG or ABS/ASA but I've been rocking a PLA one and it seems to work…
I was not satisfied with the stiffness or size of the rotor blades for the giro2020 3D printed autogyro found here https://www.thingiverse.com/thing:4172759 . So I went searching for some off the shelf and other printed solutions. I found…
Designed on request. I have printed and tested fitment, it works. Have not taken it to the range yet. Should be able to fit filament into the iron sight holes. Uses 2x M4x35mm bolts Update: V2: adjusted mag catch dimensions, added stops…
Requires a mount that came with the light and a short m5 screw to attach said mount to the print. There are two versions, adhesive being the later version that came out of frustration with the zip-tie one which I don't recommend. Zip-tie…
Крышка бойлера черная P0049 Saeco Talea Giro Black cover for vain boiler P0049 Saeco Talea Giro
GIRO.ETS - 5015 Radial Fan Bracket General This bracket was designed to be mounted on the 2020 aluminium extrusion profile over the printed circuit board (PCB) of the Eryone Thinker S and should be used to cool down the TMC2208 stepper…
Hi ! Here is my first iteration on the HyperX contest. The design Models has been inspired by the famous giroid infill. Is is still on works for future update and improvement but I am already satisfied with this results Printing and…
GIRO - TEVO Tarantula Heatbed Holder General This heatbed holder was designed to manually move the heatbed across the Y-Axis. It should prevent to touch a hot heatbed by accident or to prevent that you have to touch the printsurface after…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = giroud…
clips to hold a headlamp in place on the Giro Tyrant helmet (large size). Might also fit other sizes, not sure. Parameters in f3d file are adjustable to fit other sizes of headlamp straps.
Ich habe hier FC Girona Untersetzer mit dem passenden Halter. Es passen 10 Untersetzer in den Halter.
Full tetra-sphericon Giroid toy Tetraesfericón entero juguete Giroide
Pop the go pro mount off, insert the "bar" from the top, pop in the top piece, screw a 1/4-20 1/2" long flat head through and you're ready to go! Print Settings Rafts: No Supports: No Resolution: .3 Infill: 50 Notes: Use at least 4 walls…
You need to have also M4x20mm screw and M4 DIN bolts. I used BambuLabs X1 Carbon 0.4 Nozzle Example lightspot is https://www.occhio.com/products/io-giro
Full hexa-sphericon Giroid toy Exaesfericón entero juguete Giroide
GIRO.ETS - BLTouch Mount General This bracket was designed to be mounted on top of the hotend enclosure. The BLTouch should be mounted facing the right side and the cables should be pulled through the longhole in the bracket. You will…
Pointy hollow hexa-sphericon Giroid toy Exaesfericón hueco puntudo juguete Giroide
GIRO - X-Axis Idler General This X-Axis idler is inspired by the design of bdwalker1 . I wanted to make it fit better on my printer and remixed this idler into a screwable version. The X-Axis idler needs two M4 screws to be mounted…
yellow until 6.6 white until 7.2 finish with red
Replacement of the original clip securing googles of the ski helmet Giro Sonic
Knob for Girolle (Drehknauf für Käsehobel - ‘Tête de Moine’ Käse) mit “Krampen” für Halt in der Achsenrille. PETG or FLEX (add 2 or 3% in y,y,z) recommended
What Snaps into the receiving visor (peak for our friends in the UK) clip on a Giro bike helmet. Why My new Giro Radix helmet came with a remarkably short visor. Even though the longer visor from an old Bell helmet fit the Giro clips,…
I needed a new holder for a strap by Giro Article goggle. There are no new straps that you can buy, so needed to help myself. I decided to make it more resilient with more pins that hold the strap. The original desing from Giro is really…
hey everyone this is a giro figet i have not had problems with it but you might have to scale it up on whatever slicing software you use. if you make this please give me feedback on how it is. hope you like it thank you!
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = giroud…
Català: Model 3D de la comarca del GIRONÈS, realitzat a partir de dades topogràfiques oficials de l’Institut Cartogràfic i Geològic de Catalunya (ICGC). Mitjançant el programari QGIS i el complement DEMto3D, s’ha generat un arxiu STL que…
The DigiRoller is a Pico Pi powered pocket digital die roller designed for D&D/Tabletop gaming. Use it to make a handfull of simple rolls, or to roll a ton of dice all at once. I am posting this project because what got me into it was…
I needed a new holder for a strap by Giro Article goggle. There are no new straps that you can buy, so needed to help myself. I decided to make it more resilient with more pins that hold the strap. The original desing from Giro is really…
I was not satisfied with the stiffness or size of the rotor blades for the giro2020 3D printed autogyro found here https://www.thingiverse.com/thing:4172759 . So I went searching for some off the shelf and other printed solutions. I found…
Voici une girouette que j'ai conçue pour mon voilier de 6m mais elle peut fonctionner pour n'importe quel bateau. l'ensemble est monté sur un axe de diamètre 6mm et tiens avec une goupille fendue. Je l'ai imprimée en PLA sur la diagonale…
Girona FC shield with flexi legs. Find others shields in my collection https://www.printables.com/@PipodV3D_2293483/collections/1979805
enganche anti giro de fan fan anti twist
A simple leveling table feet for girona ALLIBERT Category: Outdoor & Garden
Girouette OM sur manche a balais lien roulement : 6000-2rs | 123roulement Lien Manche à Balais : Manche à balai en bois | Action FR
GIRO.HUE - Play Light Bar Mount General This bracket was designed to be mounted on back of the Philips Hue Play Lightbar Mount. This mount is designed to be glued onto the cabinet or the wall so that does not need to be screwed in place.…
GIRO - Dual Y-Axis Bracket General This design was inspired by colindo . In my opinion the original design did the job but it wasn't really stiff so I decided to remix it and make my own design. It's stiffer and also has an automatic…
GIRO - Titan Extruder Bracket General This Titan Extruder Bracket is inspired by the design of Navame . I wanted to make it fit and look better on my printer and created a similiar bracket for the Titan. These brackets does fit for the…
GIRO.remix - Gorillagrill / Gorilla Fan Duct Cover General This is a remix of paul0's Gorillagrill for the Gorilla fan duct also made by paul0. This Gorillagrill must be mounted infront of the 30mm fan of the Chimera hotend. You will need…
3D printable topographic miniature of Girona - 🇪🇸 Spain Capture the beauty of Girona 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 41.979, 2.817 (LatLng) . It is…
3D printable topographic miniature of Fuengirola - 🇪🇸 Spain Capture the beauty of Fuengirola 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 36.539, -4.625…
GIRO.HUE - Fugato Wired Wall Mount General This bracket was designed to mount the Philips Hue Fugato Single Lamp onto a wall without the opportunity of having a wire coming out of that wall. With this option you can directly wire the…
from Spool holder by Prusa Resear ch
You will need the end screw which can be taken from the other GoPro mount.
The knob fits the original Girolle from LaGirolle SA. A Girolle is used to scrap very fine layers of a cheese called “ Tête de Moine ”. You get with a Girolle fine rosettes of cheese to enjoy as an apéritif with matching white wine. The…
Part broke down so I reverse-engineered it. Printed in PETG with organic supports, see the 3MF. The compliant mechanism still works, simply push it it to lock in place.
Dos opciones: Left - PAra colocar el seguro del mailon a la izquierda Right - Para colocar el seguro del mailon a la derecha El diseño original tuvo 2 versiones La version 1.0 tenia esquinas y un error de 2 grados En la version 1.1 se…
Giro d'Italia keychain Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 100 Filament: Other PLA Pink Category: Hobby
The handle fits the original Girolle, since the old one broke. A Girolle is used to scrap very fine layers of a "Tête de Moine” cheese. The shape is very similar to the original. The shaft has a diameter of 7 mm and the notch is 26 mm…
