GIRO - Endstop Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
GIRO - Endstop Bracket General This endstop bracket is designed for the Y-Axis of the TEVO Tarantula. It is especially…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 51
- Makes
- 0
- Views
- 308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
GIRO - Endstop Bracket
General
This endstop bracket is designed for the Y-Axis of the TEVO Tarantula. It is especially designed for those of you which are using the carbon Y-Axis carriage by Mackers or the aluminium Y-Axis carriage by Taralu or other manufacturers. It's a bit shorter than the original bracket so the endstop will be pushed by the cariage correctly.
Printing
Print this bracket with a lower speed, for example 40 mm/s, to get a more accurate printing. Also print with 100% infill to get maximum strengthness of your bracket. Support structures aren't necessary.
Additional Information
Let me know if there are any kind of problems with this bracket. I will try to help and if neccessary correct the design. I appreciate any kind of feedback to this bracket.
If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work.
