Counting matching models…
3x3x1 inch hide for small terrestrial tarantulas and small reptiles. I couldn't find anything that would scale for my little Chilian Rose Hair so i made a very simple hide for them. Infill: 15% Support: Snug Brim: Yes Raft: No
I got a free Tarantula Pro with a creality hotend which wasn't mounted and the Creality fan shroud. I decided to adapt it to an E3D V6 for printing Nylon and CF-Nylon so I designed up this part. Mounts with two M3x18mm (or 20mm) flathead…
The control boxes on Thingiverse for the Tevo Tarantula were all too big and tried to incorporate everything into one case. I like the power supply sitting there all naked, and I'd already designed a case for the MOSFET expansion board so…
Inspired by several Brackets on Thingiverse, I decided to design my own. These brackets might be a bit overkill, but I really wanted something heavy duty and with good stability. I also eliminated the inside corner brackets at the top of…
works great for me with mini sherpa, nitehawk 36, cpap cooling, crossbow cutter,CHC XL Wr Air and biqu microprobe.
This filament spool holder is intended for the TEVO Tarantula Pro, but will also work on any other 3D printer with 20X20mm extrusion on its top, or a 20X40, or 60,or 80, etc. extrusion on its top, as long as the 20mm side is facing up.…
This is a very ideal upgrade for every TEVO Tarantula Pro that allows for more sufficient cooling to the power supply. After getting my Tarantula Pro working through following the manual, I noticed that the 24v power supply unit (PSU) is…
For all of you who might feel that your stock TEVO tarantula's hot end is inadequate in that it doesn't have a part cooling fan nor a mount for an inductive sensor, than these parts are for you. The fan vent holds a 5015 fan and provides…
This is a remix of a z-motor mount made by Albatrossity: https://www.thingiverse.com/thing:2754633 The original mount worked mostly well. However I found that the top plate that gets mounted to the 2020 extrusion wasn't thick enough and…
works great for me with mini sherpa, nitehawk 36, cpap cooling, crossbow cutter,CHC XL Wr Air and biqu microprobe.
Hello, I have here for you Black tarantula, spider, black widow . They are really true to their real sting. A little scary, but still suitable as a decoration, or for coloring. The spider monsters are fully authentic, very detailed. Good…
A strong, stable (very important) and very convenient dial indicator support that is set at the back side of the Tevo Tarantula X-carriage. I use it for manually leveling the bed, and to set the nozzle height at the right distance to get…
A functional Runout Sensor to fits with MK8 Extruder for filament 1.75mm, just print and use it. You need enable it in firmware, I used Marlin 1.1.9, My board is MKS Base 1.4, this mainboard came with my Tevo Tarantula. This changes work…
I thought the f*cktopus needed a friend with the same loving demeanor, so I designed the f*cktula. It's kind of a nightmare to print but it looks cool if you can pull it off. The human hands are truly disturbing and I probably wouldnt do…
This is Direct Feed Titan Extruder X-Carriage designed to work the the Tevo Tarantula. This was designed to work specifically with an E3Dv6 Hotend, E3D Titan Extruder, and a Nema 17 Pancake Stepper motor (Link below to dimensions and…
Remixed / adjusted thingirob's Tevo Tarantula Modular X Car Basic X Carriage to accommodate for the Openbuild wheels and Openbuilds Aluminum Extrusion. Wheels fit in the V-Slots better but results in the spacing to be too wide for the…
Tevo Tarantula X Cartridge w/Autolevel Sensor Mount Uses heat press screw inserts in the carriage. Available for purchase here: http://www.mcmaster.com/#94180a331/=118mq8b NOT my design. Forgot where I found it. Want to mod it a little…
Slightly Extended version of my TAZRantula (Tevo Tarantula Mod) Z-Nut Mount. (fixed by Bruce W) Z-Mount Nut Remix created for my custom TAZRantula (Tevo Tarantula duel kit mod). Will work only with TAZRantula (Tevo Tarantula Mod) Z-Mount…
Slightly Extended version of my TAZRantula (Tevo Tarantula Mod) Z-Mount. Z-Mount Remix created for my custom TAZRantula (Tevo Tarantula duel kit mod). Works with single or dual Z-stepper motors / rods. IMPORTANT: Will require the extended…
Z-Mount Remix (fixed by Bruce W) for my custom TAZRantula (Tevo Tarantula duel kit mod). Compatible with upgraded / fixed Z-Nut mount. Works with single or dual Z-stepper motors / rods. Print Settings Printer Brand: RepRap Printer:…
Big Tarantula - magnetic, only for experienced printers :) Printed with a 3 mm brim and light tree supports.. I recommend using 3Dlac, the legs tend to bounce off the printing plate. Can be used as a Halloween decoration or as a fridge…
I'm working on a second printhead for my Tarantula since I've earn a nice complete E3Dv6 head - I had taralu parts modular_X_dual_E3DV6 - so let's order the second E3DV6 and see what I can do with a dual E3DV6 head.... First issue : the…
A number of people have contacted me saying they would like a spider with 8 legs, so here it is. Printed with a 3 mm brim and light tree supports.. I recommend using 3Dlac, the legs tend to bounce off the printing plate.
In some cases head of the screw hits the extrusion or somewhere... You can solve this problem in a simple way by using "Advanced Endstop Bracket for Tevo Tarantula". Print Settings Printer: Tevo Tarantula Rafts: No **Supports:** Yes…
The original oldham coupler does not fit 3-Wheel X Brackets because brackets are 5mm thicker than default ones. This oldham coupler is 5mm cutted version of https://www.thingiverse.com/thing:2039498 So you will be able to use this oldham…
This is the "without spacers" version of https://www.thingiverse.com/thing:2628544 The spacers came with tevo printer is strong enough to handle preasure but printed ones are not. So i recommend using default spacers. -You will need 4…
This filament spool holder is intended for the TEVO Tarantula Pro, but will also work on any other 3D printer with 20X20mm extrusion on its top, or a 20X40, or 60,or 80, etc. extrusion on its top, as long as the 20mm side is facing up.…
This is a very ideal upgrade for every TEVO Tarantula Pro that allows for more sufficient cooling to the power supply. After getting my Tarantula Pro working through following the manual, I noticed that the 24v power supply unit (PSU) is…
For all of you who might feel that your stock TEVO tarantula's hot end is inadequate in that it doesn't have a part cooling fan nor a mount for an inductive sensor, than these parts are for you. The fan vent holds a 5015 fan and provides…
This is a remix of a z-motor mount made by Albatrossity: https://www.thingiverse.com/thing:2754633 The original mount worked mostly well. However I found that the top plate that gets mounted to the 2020 extrusion wasn't thick enough and…
Robot con patitas móviles, se puede levantar y girar su cabeza Si buscan en mi perfil el robot con cañon, le pueden poner el cañon en la cabeza, la versión de las imágenes está al 75% y se imprime sin soportes
For printing, I used natural PLA from Bestfilament.
Hey everyone! A brand new STL file is now available for you – an articulated tarantula with smooth joints and a wicked cool design. Perfect for your next 3D print! License Notice: This model is free for personal, non-commercial use only.…
Stands the main board off the tower enough to clear the BLTouch on the V4 fan duct with large bed. Without this, the BLTouch hits the board at the far end of travel. Use the existing t-nuts to lock the riser in place and some additional…
3 alternate rocket pods original fine work by Hszer0, Cosmocrator, and AlbinoRavenMini. Rescaled all the models to correct dimensions, added some skulls, rivets, sensors, and rockets, finally sliced them up for easier print. Compatible…
Dual Las cannon with mount that fits Aegis base or Tarantula base. The las cannon is split for easier print. I provided one version with peg. I also provide one with hole. I used a toothpick as a dowel to mount the cannon into the frame.…
Yet another Gatling gun. This one fits the Aegis base or Tarantula base Compatible weapons platforms can be found here: Hyperion Defense System Collection by Vontragg | Printables.com Category: Props
Hyperios Radar assembly fits Tarantula base or Aegis base Compatible weapons platforms can be found here: Hyperion Defense System Collection by Vontragg | Printables.com Category: Props
Hurricane Bolter frame for the Aegis turret base or Tarantula base. I've provided 4 different shields to protect the ammo boxes. Compatible weapons platforms can be found here: Hyperion Defense System Collection by Vontragg |…
To GW scale Aegis turret base with more details (adding to the fine work by VooDooMon). As well as a to GW scale Tarantula base with foldable legs (originally by JimJimJimmyJim) I added loops to each base to facilitate lifting and…
This is a clamp designed to level your bed with the help of a dial gauge. With this clamp you can attach the gauge to your hot-end (single and dual nozzle) and make sure your bed is level by a precision of 0,01mm. The clamp is simply…
Meet the articulated Tarantula! Sorry to anyone out there with arachnophobia, but don't worry, this fella doesn't bite! It's just a friendly spider, that likes to hang around all day, and observe what's happening with its eight curious…
[Update 2] Got fed up with missing Z height. So I moved the chain behind the Z rod with a couple extensions. The X carriage extension is for the LPA Modular X carriage at https://www.thingiverse.com/thing:2034743 . [Update] I created a…
This is a remix of the awesome Radial Fan Fang modified to be easier to print in ABS. It fits a Tevo Tarantula with the stock carriage using a 4020 radial fan, with or without a BLTouch. The Radial Fan Fang is hands-down the most…
Two little hooks to nicely hang your Tarantula display to a vertical surface, such as the side of a cabinet. The hooks must be glued (I used strong double-sided tape). Notes: These hooks need supports to be printed. The suggested printing…
Remixed front-facing Z end-stop from RC-3D for the Tevo Tarantula. The switch holder is exactly the same (included here for convenience). The remixed screw-holder has the following changes compared to the original: Uses two M3 20mm screws…
Bowden tube support clamp for the original Tarantula carriage. In some circumstances (high Z or short tube), the bowden tube tends to overflex just before the hotend. This clip snaps directly on the original carriage, providing a more…
Tarantula spider Printed in PLA and used Tree supports which a a nice texture and look to the bottom of the print.
Halloween super realistic tarantula spider - high quality
GIRO - TEVO Tarantula / Y-Axis Motor Mount General This Nema17 stepper motor bracket was designed to improve the Y-Axis movement by reducing the friction of the idlers due to the fact that if you want to tension your system properly then…
GIRO - TEVO Tarantula / 608 Ball Bearing X-Axis Idler General This idler was designed to be mounted on the X-Axis of the TEVO Tarantula and uses 608 ball bearings. This idler is also usable for other printers with a 4020 extrusion profile…
GIRO - 608 Ball Bearing Y-Axis Idler General This idler was designed to be mounted on the Y-Axis of the TEVO Tarantula and uses 608 ball bearings. This idler is also usable for other printers with a 4020 extrusion profile as an axis.…
GIRO - TEVO Tarantula Heatbed Holder General This heatbed holder was designed to manually move the heatbed across the Y-Axis. It should prevent to touch a hot heatbed by accident or to prevent that you have to touch the printsurface after…
GIRO - 626 Ball Bearing X-Axis Idler General This idler was designed to be mounted on the X-Axis of the TEVO Tarantula and uses 626 ball bearings. This idler is also usable for other printers with a 4020 extrusion profile as an axis.…
Print on its side with 100% infill. Holds the batteries with a solid clamping force. You can reinforce it with an elastic band if you want. Requires those super small M1 screws that come with the frame.
This is a modification of paul0's Coolatron fanduct. I printed the original, but noticed the airflow was inadequate. So I spent an hour further hollowing it out in tinkercad. This version seems to have at least double the airflow when…
Modeled this to hold a 9.5 x 9.5-in glass plate to my Tevo Tarantula Pro's heated bed. Slides in between the aluminum plate and the foil insulation and is held in place by the leveling spring tension. Print with PETG or ABS for heat…
This is a remix of the Raspberry Pi + LM2596 mount from achmed20 . I've made it a little thinner for faster printing. Since it's not a structural part of the printer this should have no effect. I also added a notch near the SD card slot…
Remixed for my Tevo Tarantula Pro. It uses the stock IEC plug and switch assembly. Screws Used: 8-10 x M4 Screws (4 for the PSU mount, 2-4 for the base to frame, 2 for the top mount to frame) 4-6 x M4 T-Nuts (for the frame mounts) 2 x M3…
Work in progress For now, only the right part was changed
Are you a joke lover? Welcome to the right place. But maybe you are exaggerating with this... However, this is the best way to give your wife / girlfriend a heart attack. If you print that the right way, i'm sure they're gonna hate you.…
This is a stabilization bracket for the Tevo Tarantula printer. In the stock printer the Z-Axis 'floats' on the flexible shaft coupling which creates some vibrations and compromises rigidity. To install this you need 1) a standard 8x22x7…
Eight legs, endless character, meet the Tarantula from our Jungle Collection. 🕷🌿 This fully articulated tarantula brings the dense, mysterious energy of the jungle straight to your desk. Every one of its eight legs flexes independently…
Hello, I have for you Spider Monster, Tarantula They are really true to their real sting. A little scary, but still suitable as a decoration, or for coloring. The spider monster is fully authentic, very detailed. Good luck with the…
Hello, I have here for you Black tarantula, spider, black widow . They are really true to their real sting. A little scary, but still suitable as a decoration, or for coloring. The spider monsters are fully authentic, very detailed. Good…
Each of the eight legs is multi-segmented with ball-and-socket or hinge joints, allowing the spider to be posed in a "creeping" crawl, a defensive "threat pose," or draped naturally over the edge of a surface.
Long time ago, Amazon was a treasure trove for those of us who provided HONEST reviews in exchange for products. Amazon put a stop to that, but back then, one of the items I scored was an endoscope camera. I used it a few of times so I…
Never being one to be satisfied with the status quo, I wanted a control knob that would compliment my new purple case , and the original blue insert just didn't work. I wanted white, so I designed my own. Yep... it's super simple, but I…
I like the use of the clear acrylic panels for the mainboard and for the LCD control board. I like to see my electronics (mechanical workings, too). The problem with this, though, is that the sides are exposed. That is very bad for…
I am printing parts for my Tevo Tarantula in purple so that it can have a purple/black theme going on. To that end, I wanted a purple knob. So... I made one. Or rather, I made two. The first version is a straight sided knob with a hollow…
Osiak's X belt tensioner works really well but the original belt holder lifts the belt by about 5mm. This causes inaccuracy in x movement as the belt becomes a hypotenuse in a right angle triangle and thus the actual carriage movement is…
Adjustable z stop for Tevo Tarantula, designed to be narrower and simpler than others I have seen. The mounting bolts of both pieces are easily accessible. The adjusting bolt is held by a hex nut top and bottom which keeps tension without…
Features : • A little window to look trough for viewing the nozzle • Holes on top to help the heat dissipation • Supports for blower fans • Wedges to hold the blowers for easier screwing • Ducts that slightly compress the air for more…
It's a display and board stand for the Tevo Tarantula that keeps all the fancy clear acrylic pieces. Print twice, with one of them mirrored. Supports are helpful for the upside-down countersunk holes in the base, but not strictly…
A new 3D figurine generated by AI, a Tarantula Sculpture. I used a raft and tree supports to print it I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly…
This is a re-designed version of the direct drive extruder mod from Granitoid. I had to adjust the holes placement since they were not fitting the ones of my aluminum carrier. Furthermore I added a hole for the hot-end cables and a hole…
PTFE tube attachment for Tevo Tarantula direct extrusion mod. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black Category: 3D Printer…
This is a remix of my laser module hold. In this version I have implemented a quick remove and a resting station for the laser, so I can switch fast from 3D printing to laser engraving and vice versa. Category: 3D Printer Accessories
This is a laser module holder to be mounted directly on the backside of the Tevo Tarantula' s X carriage. The advantage of this approach is to have both the laser module and the hotend mounted at the same time but the X cariage will be…
This simple mod makes it easier to adjust the heights of the Z limit switch when the printer is accessible just fron the front side (e.g. when it is stored in an enclosure). there are two parts to be printed, one needs to be mounted…
03/04-19 Update: Added sligtly tweaked parts with M3 screw holes for the fans. And shorter ducts that improve the spread of the cooling air over the part and reduce the risk of them getting warped by the heat from the hotend. I recommend…
New more compact design: https://www.thingiverse.com/thing:2536406 Designed this mount in an attempt to reduce noise I got three 40 mm noctua low noise fans. The BLTouch is offset 1.90mm from the nozzle. The mount is made in three parts…
Just a simple E3D-v6 clamp with fan mounts and sensor mount for an inductive sensor. It's just a temporary mount before I get replacements for the acrylic parts. The funnels are separate from the clamp to make it easy to print. Just flip…
Base of the work from 'Ultimate TEVO TARANTULA upgrade' from kwijatkowski ( https://www.thingiverse.com/thing:2761136 ) but with a few alterations Category: 3D Printing
Could never get my BL touch dialled in so I wanted something I could adjust from the top with a single turn. You could use either a spring over the M4 screw and print a dial for the top, or use elastic bands as I have to keep the tension.…
This mount allows you to use the Precison Piezo Orion bed level sensor, E3D V6 with Titan direct extruder, with Lion4H his Radial Fan Fang ( https://www.thingiverse.com/thing:2175956 ). More room was needed to clear the Precision Piezo…
Based on https://www.thingiverse.com/thing:1704100 This has remixed side panels to increase the Y axis travel. The original plates cause you to lose approximately 13.5 mm of Y axis travel space which is bad if you have a large bed.. Just…
I wanted to create an exciting solution of a pen holder on my office desk. There I need just one pen which I wanted to give the respective ambience. Perfectly fitting to the vision in my mind I found the spider model of Jason C Kessler.…
Shortened the rail spacer so that you could put them at the ends of each rail. Not sure if this helps, but I didn't like the rail ends hanging in the air. Print Settings Printer: Tevo Tarantula Rafts: Doesn't Matter Supports: Doesn't…
Dial indicator mount for Tevo Tarantula Modular X Car (and its derivatives) - https://www.thingiverse.com/thing:1438795 My dial indicator came with an M7 bracket, so I've used this as a mounting point. You will need a M4 bolt and a washer…
I've remixed thingirob's adjustable Z endstop and added a mounting bracket for the microswitch, so that you can mount it in front - which should make it easier to adjust. Mostly because I run my lead screw in the middle of the 2040…
Diagonal mount for e3d/Titan extruder combo. Because the Titan extruder has an offset, the nozzle is about 2cm to the right. I've tried to rotate it diagonally so that its centered. There are two different versions, one for the modular X…
The aluminium Y-carriage is a great upgrade : https://www.fankhauser.me/collections/tevo-replacement-parts/products/aluminum-y-carriage-for-tevo-tarantula But being machined aluminium, its got a lot of sharp edges, especially since you're…
Quick frame brace for the Tevo Tarantula - in the style of the Prusa Mendel. You will need to have already secured the Y carriage rails to your base board, you can use something like these : thingirob brackets (…
I've designed this to be : small, only 7 grams easy to print and requires no supports, just orient it flat on the bed perfect for new Tarantula owners using the filament that came in the box minimum additional hardware requirements, only…
![[2x REMIXED] Tevo Tarantula 3-Wheel X Brackets](https://media.printables.com/media/prints/1080031/images/8166886_08e6c378-4e77-41e3-92df-e20035b6df0d_303a1063-5369-4216-a069-a635c06b5245/7f3d58b193ac4ce8e0730da9d0d6e8ce_display_large_1080031.jpg)
![[Remix/Mod] Coolatron V2, fanduct for Tevo Tarantula using 50x50x15 Blower](https://media.printables.com/media/prints/149108/images/1401359_c9ba934f-aee3-4ad5-8fc6-c4a70e3ab279/dd52d299c67ef5dfee6973e8019fba20_display_large_14.jpg)
