Runout Sensor for MK8 Extruder 1.75mm (same of Tevo Tarantula)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A functional Runout Sensor to fits with MK8 Extruder for filament 1.75mm, just print and use it. You need enable it in…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A functional Runout Sensor to fits with MK8 Extruder for filament 1.75mm, just print and use it.
You need enable it in firmware, I used Marlin 1.1.9, My board is MKS Base 1.4, this mainboard came with my Tevo Tarantula.
This changes work to me, maybe it'll not works for you.
Configuration_adv.h
#define ADVANCED_PAUSE_FEATURE // I uncommented this line
Configuration.h
#define FILAMENT_RUNOUT_SENSOR // I uncommented this line #define FIL_RUNOUT_INVERTING true // And set this line to true
pins_RAMPS.h
//#define Z_MAX_PIN 19 // I commented this line #define FIL_RUNOUT_PIN 19 // And changed this from 4 to 19 I needed to change this lines in"pins_RAMPS.h" because inMKS Base 1.4 the pin 4 is not available, so I changed to pin 19 that is the endstop of Z+ this is not in use to me. So if you made this changes you'll need to connect the runout sensor at pin 19 (endstop Z+).
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament: Unknown PLA Black
Category: 3D Printer Parts