1 / 3
Tevo Tarantula Pro Raspberry Pi Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the Raspberry Pi + LM2596 mount.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 333
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the Raspberry Pi + LM2596 mount from achmed20. I've made it a little thinner for faster printing. Since it's not a structural part of the printer this should have no effect. I also added a notch near the SD card slot to make it easier to remove from the top of the printer (under the print bed).
Screws Used:
- 3 x M5 with hammer nuts to attach to frame
- 4 x M2.5 to screw down the Pi
- 2 x M3 to screw down the LM2596
Print Settings
- Supports: No
- Resolution: 0.2
- Infill: 10