GIRO.ETS - 608 Ball Bearing Z-Rod Stabilisation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
GIRO.ETS - 608 Ball Bearing Z-Rod Stabilisation General This bracket was designed to be mounted on the Z-Axis of the…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 58
- Makes
- 0
- Views
- 345
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
GIRO.ETS - 608 Ball Bearing Z-Rod Stabilisation
General
This bracket was designed to be mounted on the Z-Axis of the Eryone Thinker S and uses 608 ball bearings. This bracket stabilises the Z-Rod and helps to strengthen the frame of the Eryone Thinker S.
You will need additional screws, nuts and washers for the mounting of bracket. The needed parts are mentioned below.
Additional screws, nuts and washers per bracket
- 2x M4x10
- 2x M4 Washer
- 1x 608 Ball Bearing
Printing
I would recommend to use 2 or more perimeters. Print with a lower speed, for example 40 mm/s, to get a more accurate printing. I recommend to print the bracket with at least 50% infill.
Additional Information
Let me know if there are any kind of problems with the bracket. I will try to help and if neccessary correct the design. I appreciate any kind of feedback to this bracket.
If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work.
