FRC Logo Keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little keychain with the First Robotics logo on it.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Please note that the STL has a diameter of 4 inches, while the GCode is scaled to 25%, so it has a diameter of 1 inch.
A little keychain with the First Robotics logo on it.
Dimensions:
4 inch diameter (10.16 cm)
.25 inch thickness (0.635 cm)
.125 inch depth (0.3175 cm)
The hole for a chain has a diameter of .5 inches (1.27cm)
Print settings:
The back is blank, so print with that face facing build plate.
No supports
25% infill (feel free to chose your own)
Any layer height, but I'd recommend .12 mm.
Use whatever speed you normally use. (I normally use 55 mm/s)
Feel free to change any settings for any reason.
The attached pre-sliced file is sliced with .05 layer height, .4 nozzle, 55mm/s speed 15% infill, infill pattern “triangles” and bed temp of 65C and nozzle of 200C. (Sliced for Ender 3)