FRC Logo Keychain
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.24 – €0.29 net (excluding VAT)
For file: FRCkeychainTiny.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.27 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 22.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A little keychain with the First Robotics logo on it.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 114
- Makes
- 0
- Views
- 329
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Please note that the STL has a diameter of 4 inches, while the GCode is scaled to 25%, so it has a diameter of 1 inch.
A little keychain with the First Robotics logo on it.
Dimensions:
4 inch diameter (10.16 cm)
.25 inch thickness (0.635 cm)
.125 inch depth (0.3175 cm)
The hole for a chain has a diameter of .5 inches (1.27cm)
Print settings:
The back is blank, so print with that face facing build plate.
No supports
25% infill (feel free to chose your own)
Any layer height, but I'd recommend .12 mm.
Use whatever speed you normally use. (I normally use 55 mm/s)
Feel free to change any settings for any reason.
The attached pre-sliced file is sliced with .05 layer height, .4 nozzle, 55mm/s speed 15% infill, infill pattern “triangles” and bed temp of 65C and nozzle of 200C. (Sliced for Ender 3)