Newmar New Aire RV Drain Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drain cover mounts on top of existing cover to keep debris from clogging drainline
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My 2019 Newmar New Aire Class A RV, as well as other Newmar RV lines use a drain system with drain lines at each corner. They are notorious for getting clogged with debris requiring at least a yearly exercise to clear. I removed the setscrews and just have wing clamps on the bottom duckbill for easy removal. I clear my drain lines by a combination of pressure water from the bottom and top until the gurgle. Its a pain to do so I decided to design something that would strain the wastewater better than the existing drain cover so here goes, I will see how it works this season so consider it a work in progress.
To install, the existing cover remains in place and the strainer edges are glued to it. Alternatively, the existing cover can be removed and a strainer retainer screw added to keep in place. I chose the later but both models are uploaded.
For the screw retainer version I used a 1 1/4 #10 machine screw, with keeper nut on the existing cover. When the strainer is attached I used a wing nut on the strainer so I can remove/replace as needed. All hardware is stainless steel.
Printed in PETG so it should hold up a season or two. Print with the strainer top down without supports.