1 / 5
Newmar New Aire RV Drain Cover — image 1
1 / 5

Newmar New Aire RV Drain Cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Drain cover mounts on top of existing cover to keep debris from clogging drainline

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
92
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

My 2019 Newmar New Aire Class A RV, as well as other Newmar RV lines use a drain system with drain lines at each corner. They are notorious for getting clogged with debris requiring at least a yearly exercise to clear. I removed the setscrews and just have wing clamps on the bottom duckbill for easy removal. I clear my drain lines by a combination of pressure water from the bottom and top until the gurgle. Its a pain to do so I decided to design something that would strain the wastewater better than the existing drain cover so here goes, I will see how it works this season so consider it a work in progress.

To install, the existing cover remains in place and the strainer edges are glued to it. Alternatively, the existing cover can be removed and a strainer retainer screw added to keep in place. I chose the later but both models are uploaded. 

For the screw retainer version I used a 1 1/4 #10 machine screw, with keeper nut on the existing cover. When the strainer is attached I used a wing nut on the strainer so I can remove/replace as needed. All hardware is stainless steel.

Printed in PETG so it should hold up a season or two. Print with the strainer top down without supports. 

Tags