Trimming jig for DeWalt DCW600
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trimming jig for DeWalt DCW600 DCW604 D26200
- Ocena
- 5 / 5
- Polubienia
- 120
- Pobrania
- 280
- Wydruki
- 6
- Wyświetlenia
- 2844
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Adapter that allows the protruding parts to be milled into a plane. The adapter snaps into place on the original base. Assembly and disassembly is a matter of seconds. At the end of the adapter is a spherical handle that helps stabilize the cutter. It is necessary to insert an iron cylinder with a length of 65 mm and a diameter of 30 mm into the spherical handle. The iron cylinder acts as a weight so that the cutter does not predominate. It is necessary to drill a 5 mm hole in the cylinder and cut an M6 thread into it. The adapter has a 5mm hole for gluing an M6 screw without a head.