Shure P3T Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Top mount for the Shure PSM300 Transmitter P3T
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this model to be able to attach my P3T transmitters up to the underside of the stage.
The inside of the mount has about 2mm of slack in both directions so you shouldn’t have to fight to get your transmitter in or out. The mount does feature lips on the front and back which prevent it from falling out. The transmitter cannot push through the back at all, in the front it can lift up over the lip to be removed.
The screw brackets are countersunk for standard construction screws or drywall screws.
I printed at 15% grid infill using PETG and it seems plenty strong to support the weight of the P3T.