1 / 2
ventermech rear arm bed wires clip drag chain mod
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Instead of directly attaching wires to the bed clip this mod allows for the use of a drag chain
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 703
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
Instead of directly attaching wires to the bed clip this mod allows for the use of a drag chain. I used https://www.aliexpress.com/item/1005001795469984.html (10x15 R18) and modeled it for use of m3 heatsets. I recommend sanding the angled surface after printing for best results.
The separate spring is meant to be glued in after printing to allow for optimal printing orientations.