Another Lab plate vortex/shaker from a 140 mm fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix from WaveSupportAparatus' design. Changes from original: 1) Spring mount remodeled.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 1111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Remix from WaveSupportAparatus' design.
Changes from original:
1) Spring mount remodeled. Spring side has a draft to help insert the spring and has an indentation to help fix it.
2) Spring mount has a M3 compatible hole for screwing the fan, and the Base has a pin to insert the mount. You can use glue to fix it in place.
3) Base has the pin described above, and has a place to insert 14x9x12mm rubber feet underneath using M3 screw.
4) Base has a support for the 12v connector and for a potentiometer.
5) Base has a central place to hold a ballast (I'd use lead) and there is a 3d model for the cover.
6) Table has a tight fit to a 5 1/4", 96-well plate, so you don't need an adherent surface for this plate.
6) Table has a higher wall to hold more stuff. I tried to keep it as light as possible.
Electronics:
1) 140mm fan
2) 12v conector (12mm diameter mount)
3) 470 ohms potentiometer (10mm diameter mount)
Please refer to the original model for further technical details.