Power Supply Case DPS5015
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the DPS5015 Power Supply Board, Display, USB-C Board, LM2596 and a Buck Converter.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Case for the DPS5015 Power Supply Board and Display.
DC Plug and USB-C board in the back for two different options of powering everything with a threeway switch to choose and turn on/off.
There is enough Space for a two LM2596 Boards for a seperate 3.3V and 5V Supply with cutouts for two JSP-H 2.0mm Plugs in the front plate seperate from the two Banana Plugs for the main power supply.
A buck boost converter could also be put inside to allow for a higher output voltage than the input voltage.
The parts are optimized for 3D-printing so no supports should be needed.
FreeCAD project file is available.