Power Supply Case DPS5015
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the DPS5015 Power Supply Board, Display, USB-C Board, LM2596 and a Buck Converter.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 35
- Makes
- 0
- Views
- 236
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Case for the DPS5015 Power Supply Board and Display.
DC Plug and USB-C board in the back for two different options of powering everything with a threeway switch to choose and turn on/off.
There is enough Space for a two LM2596 Boards for a seperate 3.3V and 5V Supply with cutouts for two JSP-H 2.0mm Plugs in the front plate seperate from the two Banana Plugs for the main power supply.
A buck boost converter could also be put inside to allow for a higher output voltage than the input voltage.
The parts are optimized for 3D-printing so no supports should be needed.
FreeCAD project file is available.