299 models
2026/03 update: Resize holes so screws can fit and grip better. Added new models for XL4005 and other variants. It's 1mm longer and have different board screw position. ===== 2024/12 update: Added a new v2024.12 with these changes: Even…
Simple and light enclosure for the LM2596 Buck converter There is a lid with text, and with no text. .step file included --------------------------------------------------- My settings: PETG Layer height: 0.2 Perimeters: 3 Infill: 15% No…
Hello there this is a simple case for the popular cheap DC-DC converter modules (LM2596(S)). Route the cables through the case bottom before you solder them to the DC-DC converter. Easily resized and customized in Fusion360 with the…
I have re-mixed this part to include a hole for the feed wire to the LM2596 in the back of the case, also increased the length of the LM2596 mounting holes as the smallest M3 screws i have where too long, also notched the two nounting…
A tool-less, snap-fit enclosure for your LM2596 buck/step-down converter that should snap-onto any 2020 extrusion without extra hardware. This enclosure also allows you to keep your wires separate via the outside channels or together in…
I really liked @blackboots2_227840 LM2596 case design , but it didn't quite fit the version of the LM2596 converters I had in hand, namely, the board and case screws weren't aligned (there was about a 1mm difference) and the top case…
Designed for: LM2596 buck converter (see image)
I used countersunk screws to give cleaner look. Hope you enjoy!
There are many Buck Converter enclosures posted here, and none would fit what I thought was a common 1-button LED Buck Converter (66mm x35mm), which I bought on amazon. (…
I like the original model, but I wanted to be able to mount it to the underside of my Ikea Lack table. So I added two tabs for wood screws. Edit 1.4.2023 - Model slightly adjusted for easier printing (side vents)
LM2596 Holder for DIN-Rails Category: Electronics Based on Models by Greg Cormier (https://www.thingiverse.com/enkoopa/designs), 3DPrintSOS(https://www.thingiverse.com/fedorsosnin/designs) and Jens Petersen…
Based on the ingenious design by jwags55 . This remix is designed to fit the typical LM2596 buck converter. It should be a tight fit on 35mm DIN Rails and hold the converter securely. Use two M3x10mm Bolts and nuts to secure it to the…
This is a super simple holder for a LM2596 step-down buck converter module, it helps with mounting the module within a larger enclosure without shorting anything out. I bought this particular module from Banggood at the link here:…
Another LM2596 Case. None of the other LM2596 Cases I found quite fitted the Buck that I have, so I created my own. I made the button pin longer than necessary to allow for "stick out" choice. Hope it's useful. I used 4 x M3x15 screws.…
This is a snap fit enclosure for a LM2596 Buck Converter with a voltage display and PCB mounted screw terminals. No fasteners required! It does not have additional mounting features but could easily be mounted to a flat surface using…
Note: Doesn't fit Raspberry Pi 4 - see the original model for that Be sure to use supports. A drawer insert to house a Raspberry Pi 3B and a LM2596 Step Down Converter. In the final model I added holes in the back so you can run the…
I changed the dimensions for this module. https://www.amazon.de/dp/B081N6WWJS?psc=1&ref=ppx_yo2ov_dt_b_product_details
Couldn't find a bracket model for my LM2596S buck converter that fits to a DIN rail or DIN rail clip, so I designed my own in fusion. Uses a DIN rail clip, I used the heat insert version from @Maxstupo…
LM2596 DC-DC Case. Ideal for mounting on 40x20 aluminum profile. Category: Hobby --- If you are interested in supporting my work and gaining access to the original STEP file of this model, I now offer the opportunity to receive it through…
With this mount and the 97222-din-rail-bracket , you should be able to clip it onto a DIN rail. The F360 file is also here if you want to modify it; it's pretty messy. Warning : Don't just print this out and expect it to work; I found…
Small buck converter mount meant for the Voron switchwire/enderwire
Hi ! A small universal snap-on module for the regulator assembly based on the LM2596 Designed not in 'Gangnam style' but in 'prusa I3 MK3' style Cover specialy designed for my 2 projects related to the Prusa I3 MK3…
LM2596 with LED Display Voltmeter Buck Converter DC-DC 4.0-40V to 1.25-37V 2A Voltage Adjustable module.
Small case for a LM2596 based step down converter with an LED display. I use small screws to fasten the board to the bottom plate, but since they are to long I print also a set of spacers. There is also a backplate with wall mount holes…
Simple LM2596S box with lid (snap on), 2 to choose: one with creality logo, one without logo. Box model attach with two zip ties.
These voltage regulators come in several variations. Some have the polarity in the opposite orientation, some don't have a display, and some have different capacitors or terminals that effect the height. The model I based this on modifies…
Thing 1625233 doesn't work for my boards, the holes in the board are wrong and the trimpot is off to the side. The pins that go through the board are too thick and I had to cut them off. I think there may be a few slightly different…
Package LM2596S DC-DC step-down voltage regulator Adjustable LM2596S DC-DC Buck Converter Step Down Voltage Regulator Power Module 36V 24V 12V to 5V 2A Voltage Stabilizer with Digital Voltmeter Display USB Worx HUE without writing Can be…
Print with 0.1mm layer height for the best snap fit. No supports needed. (The lid in the photo is the old version)
This is a remix of http://www.thingiverse.com/thing:2154260 snug fit for the popular 21x43mm boards. Mount the PCB with m3x4 screws. The v2 version has mounting holes that are 58mm apart, which is the same as for the Raspberry Pi. That…
Updated v2 Top Cover: Changed the voltage adjustment opening from a hole to a slot per feedback to allow for variance in manufacturing. Yet another remix of this box to fit my specific buck converter, but I also couldn't find one with the…
I was looking for an Raspberry Case that could fit the Pi and a Stepdown Converter LM2596 to power the Pi directly from the power supply of my printer. I couldn't find anything I like and fited the bear upgrade as I wanted so I created my…
Remix of parts of two main board boxes. This is set up to hold SKR Mini E3V3, RPI, U2C Canbus and LM2596 Buck Converter Mount holes are at 2.80mm so should self tap M3 Holes on the right of the case are for M5 Heat Inserts RPI fan is for…
This case fits a 66x36 LM2596 buck converter board with LCD. Cutouts are available for the terminal block connection, which should be plenty room for soldered wires. A voroni-cut lid allows for heat dissipation.
This is a case that was made for the eBoot LM2596 (Amazon Affiliate Link) converter. It is designed to have the incoming wires to go straight out (I was using a JST connector and there isn't enough room to do a hard 90) have have an…
Model of a LM2596 3 Amp buck converter that you can incorporate into your designs. Category: Electronics
LM2596S Buck Converter Case, design to press fit together
Just a simple buck converter case, has cable tie points, max size is 6mm x 2mm, requires 4 x M3x6mm SHS or BHS. Buck converter is the LM2596S. Thank you to LxL3D for the use of the LM2596S Dummy model, which I used to make this case,…
RobotDyn LM2596 Step-Down module case. The converter has a button, this isn't implemented in this design yet. This is a remix from the following item: https://www.thingiverse.com/thing:4056842 It should fit this LM2596 from RobotDyn but…
I used the original models as references for screw mounting. Wanted to cover the vents since I didn't need them and if I were to print ABS/ASA I wouldn't want VOCs escaping through the vents on the back of the printer instead of going…
9 Apr 24 - Added improved housing that features additional vent holes on the side, as well as minor improvements such as small chamfers on all edges for a more refined model. Just needed a simple housing for a buck converter. Text on side…
Simple mount for buck converter
Case for LM2596 and XL6009 DC DC converter. For example it is compatible with: LM2596S DC-DC Buck Converter DC 3.5-40V bis 1.25-35V 3A Step Down Spannungswandler Hohe Effizienz Power Supply Module(5Pack) : Amazon.de: Baumarkt and ICQUANZX…
A 3 part enclosure for LM2596 DC-DC converter series. The LD2596 module's main task is to provide a lower voltage for a secondary circuit. For example from a 3D printer main power supply, from the 12-24vDC main power to the 5.3vDC…
For those looking at powering hobby electronics or moding your printer to accept a 12-volt fan to replace a 24-volt fan ... you're likely going to use a buck converter, and you may well want to place that in housing to make sure you have…
Can be used, for example, as a source for LEDs in the Prusa MK3 Ikea LACK enclosure
This is an Electronics front enclosure for Ender 3/Ender 3 Pro, it is designed to fit: Bigtreetech E3 Mini Rasperry Pi 2/3 4x LM2596 1x Noctua Fan 40x40 The design has been splitted in 4 parts, use selftapping screws 2.5 x 15 mm to join…
LM2596 Voltage Regulator Enclosure / Box Parts needed Superglue or other suitable glue 4st (3mm) X 10-15mm Countersunk Wood Screws 4st (3mm) X 6-8mm round head Wood Screws 1st low profile Heatsink ~10x10x6mm (max height 6mm) OPTIONAL…
I wanted to power my rPi directly off my printer, so bought some LM2596 voltage regulators, and wired one directly into the power. This case holds it pretty well, it's a little loose, but it's fine. Printed in PLA, PETG, or whatever…
Small enclosure for LM2596 Buck Converter. I used this to drop 24V of AD5M printer PSU to 12V to run an exhaust fan for printing ABS, ASA and POM. Since this was external to my system I wanted a fully enclosed cover for this little…
Hello, this is a remix from: https://www.thingiverse.com/thing:1625233 I changed the dimensions a little bit and changed the part to make it easier to print. I also added a locking mechanism so that you don't need a cable tie anymore. I…
A Raspberry Pi 4 case with space for an LM2596 buck converter. This is useful when you want a one cable solution to power your printer when using Klipper/Octoprint. This case also includes a extrusion profile to be mounted directly to the…
Housing for DC-DC LM2596 step-down adjustable converter Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 100% Notes: The dimensions of the model are optimized for a layer height of 0.2mm!
This is a remix of Ender 3 V2 / Pro motherboard cover for 80X25mm fan (no support) by scaryPug , which was a remix of Ender 3 V2 & Pro Silent Motherboard by TerraVestra . Designed to fit Ender 3 V2, but will fit Ender 3 Pro also. This…
This is a completely redesigned bracket for DC-DC Buck Converter LM2596S it is much more compact and it snaps into place as long as your LM2596S has the same footprint as the footprint design linked below. I wanted this bracket to use…
Designed this case for LM2596 DC-DC Voltage Regulator Adjustable Step-Down Power Supply Module with Display Please comment if any problems with it. Print Settings Printer: P3Steel Rafts: No Supports: No Infill: 30% Filament: RoHS PETG…
I needed some modifications on this piece. Vertical slots to be able to insert a LM2596 with wires already soldered on. 2 holes to screw it on a piece of wood. The screw holes for the lid are now fixed to the side. This gives the wires…
These little useful PCBs are produced by many Chinese manufacturers, so the dimensions of the boards and the position of the components may differ sometimes slightly and sometimes significantly. Before printing, make sure you have the…
Are you looking for a simple enclosure to hide your PCB? You've found one! Assembly is pretty straightforward, here's what you need: 1x Top cover (print) 1x Bottom cover (print) 1x Button (print) 4x M3x10 bolt (you can optionally use…
I wanted a compact way to power my Raspberry Pi on the Core One and identified that there's some dead space above the PSU connectors. So i extended the PSU cover to make some room and merge it with an existing LM2596 case to allow proper…
Mount for LM2596 buck converter. Parts required: 2pcs M2x10 self tapping screws 2pcs M5x10 button head cap screw
Mount for a LM2596 StepDown module i use in my CTC Bizer to generate 12V for cooling fan and lights. Print Settings Printer: Sintron Prusa I3 Rafts: No Supports: No Resolution: 0,2mm Infill: 20% Category: 3D Printer Parts
LM2596 case with access for the display, connections, button and adjustment bolt. It requires 4x M4x25mm countersink bolts and 8x M3 nuts. The case top holes are the same as the board. Four nuts are installed to the bolts, to hold the…
* NOTE: THIS IS NOT A BRACKET, this is a footprint of DC-DC Buck Converter LM2596S. If you need the bracket please click the link below. * This was a footprint design of the popular DC-DC Buck Converter LM2596S. I designed this in order…
I have remixed this so that the wires that i soldered on will fit in to it as i used thick wires
With this LM2596 Buck Converter Enclosure, you can measure and adjust the voltage, without opening it. There are two versions. Version 02 is for already soldered cables and when the cabels are meant to go to the back instead of the sides.…
simple box for a dual USB module slide in the terminal side first, then press in the USB side - this is a tight fit Category: 3D Printer Parts
I needed a simple case for a LM2596S that I had bought off Amazon. The brand is Frienda. I looked around and printed a couple to find they didn't fit. None that I downloaded listed the size of the board they were designe to fit. This case…
Enclosure for an LM2596 buck converter. To remove cable strain completely the anderson connectors lock into the case, it produces a cleaner look and works very well. This works with 15/30/45A anderson connectors like the ones in this kit…
So I was looking for a case for Songhe LM2596S Buck Converts and couldn't find one that fit this model so I made one up, Hope someone else can get some use out of this. I'll be making some changes but this version is fully Functional.…
Bracket to mount an LM2596 DC to DC converter to any extrusion with M3 hardware. A good use case is the Voron V0 Formbot kit which comes with this converter. PCB mounting holes are sized to self-tap with M3 machine thread screws (they are…
This is a case for the common LM2596 DC DC BUCK DOWN converter you can find from all the usual suspects. It includes a tab to mount to a 2020 extrusion, or anything else. The top vents also include a small circular cutout to access the…
Enclosure for a LM2596 Buck converter with an potentiometer There is a lid with text, and with no text. --------------------------------------------------- My settings: PETG Layer height: 0.2 Perimeters: 3 Infill: 15% No supports
No supports required (Basic bridging required) No screws required Any material Clips to 4020 extrusion
I couldn't find the proper size case to hold my LM2596 buck converters, so I designed one myself. This fits 56mm x 35mm boards with two buttons. Held together with M3 screws. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts:…
An case for four LC2596 step down buck converters. I would be very pleased if you post makes. Category: 3D Printer Accessories
Print in PLA Or PETG. Hope you like my Mod. Fits only the LM2596 Buck Converter.
Remixed to add vents to the lid and some holes on the back for passing wires thru.
Simple holder for a LM2596 buck converter to power a Raspberry Pi. The holder also keeps the stepper cables in place. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 38 Filament:…
Working on a version that has mounts for a BTT can bus interface A remix of a remix! Added mounts for 2 lm2596 buck converters, use a 90 degree usb c adapter to power your pi . Follow the print instructions from the original creator…
V3_A just released ---- A 3D printed box / cover for your LM2596. Should fit most boards and has good ventilation. Post can be glued shut for protection. STEP files for anyone who wants to mod it. PLA/PETG .20 100% infill nothing special…
Description The mini enclosure for the LM2596 module is a practical and popular solution used in many electronic projects. Below is a detailed description and applications of this enclosure: Enclosure Characteristics External dimensions:…
A small case to protect and secure a buck converter. Specifically an LM2596 DC-DC voltage converter. The internal screw posts will take M2 6mm bolts. May need to be drilled out with a 1/16th drill bit. Print in PETG to give the clips that…
Please leave a ♥ Like if this print was helpful to you :-) A simple housing that holds an LM2596 buck-converter and a KCD4 switch. It has two holes for cables on the short sides. You can zip-tie the cable to the bottom (strain relief).…
See summary and differences 👆👁👇
Tired of every flimsy, toddler-esque LM2596 enclosure you found online? So was I. Enter my slick, minimalistic little box: it’s built to withstand your average workshop klutz attack, fits the LM2596 like a glove, and doesn’t chug your…
Project box to hide an Arduino Uno footprint device inside and use additional space for PWM and Buck Converter.
I really liked the design from SDerrick42, and thereof took freedom to remix his thing 4271562. What I modified: adjusted round pillars and clips, to hold the LM2596 in place, to the size of my LM2596 boards of 45mm 23mm 14mm modified the…
I took original design but I've built from zero. It fits on 61mm long PCB. I've made holes on top side so you can plug/unplug wires, and I've made bigger case for connections to be deeper inside. Category: DIY
My version of an upright mount for the LM2596 DC to DC converter. There are no screw holes on the base, I usually use double sided tape to fix it. If you are planning to use it in an environment with lots of vibrations you can thread a 3…
LM2596 Case + 2x Wago 221 slots I have a seccondary fire alarm in my enclosure, that needs 9V. So i made an enclosure that holds 2 wago wire splices. I reccomend you to get a small 1-2mm drill bit. Printing holes this small is kinda hard.…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gRowRWaSjm7 Print instructions Category: 3D Printing
Case for Zixtec LM2596 buck converter Print Settings Printer: Railcore Rafts: No Supports: No Resolution: 200 Infill: 15% 3D Honeycomb Filament: Tecbears PETG White Notes: I printed out a couple of different cases for these but nothing…
This is a DC-DC Adjustable Step-down Buck Converter LM2596 , it's a pretty cool and cheap way to adjust voltage in the down direction. I use this to drive a 12V always on fan from a BTT SK3 . You can hook it up directly to a 24V power…
Pretty simple enclosure for the LM2596S board that has constant current and constant voltage functionality. https://www.amazon.com/dp/B0781JC2WK Use M3x12 socket head cap screw and nut to attach the top to the bottom. Mount the bottom to…
This is a remix of LM2596 with Display Case to add some rails to slide into 2020 aluminum extrusion without tools. NOTE: You really need a well tuned printer as this fits the 2020 extrusion profile exactly. If not, you will probably need…
Enclosure for DC/DC Module LM2596S This enclosure is designed for the safe housing of the LM2596S step-down DC/DC converter , providing component protection and easy access for adjustment and maintenance. The enclosure supports mounting…
Case for LM2596 step down board 43.5 x 12 mm, without need to use any screw for the cover. Two files: Bottom: The actual case, with holes for 2.5 mm screws. There is also a 4 mm hole at the center bottom, in case using a mounting screw.…
