LM2596 Converter Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case that was made for the eBoot LM2596 converter. It is designed to have the…
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 202
- Makes
- 4
- Views
- 1,234
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a case that was made for the eBoot LM2596 (Amazon Affiliate Link) converter. It is designed to have the incoming wires to go straight out (I was using a JST connector and there isn't enough room to do a hard 90) have have an outgoing USB cable out a single hole the other end.
Railing has been added! If you look at the input (side with 2 holes), the railing is on the corresponding side.
I have received a request externally to have 2 holes on both sides and a single hole on both sides. I will work on this request when I finish another project.
The F360 file can be downloaded for modification here.