LM2596 Converter Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case that was made for the eBoot LM2596 converter. It is designed to have the…
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 202
- Wydruki
- 4
- Wyświetlenia
- 1234
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a case that was made for the eBoot LM2596 (Amazon Affiliate Link) converter. It is designed to have the incoming wires to go straight out (I was using a JST connector and there isn't enough room to do a hard 90) have have an outgoing USB cable out a single hole the other end.
Railing has been added! If you look at the input (side with 2 holes), the railing is on the corresponding side.
I have received a request externally to have 2 holes on both sides and a single hole on both sides. I will work on this request when I finish another project.
The F360 file can be downloaded for modification here.