1 / 3
LM2596 case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for LM2596 step down board 43.5 x 12 mm
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 78
- Makes
- 0
- Views
- 479
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v2.0
Case for LM2596 step down board 43.5 x 12 mm, without need to use any screw for the cover.
Two files:
- Bottom: The actual case, with holes for 2.5 mm screws.
- There is also a 4 mm hole at the center bottom, in case using a mounting screw.
- Top: Cover with option to use a switch (2 files).
- Both are having a 3mm hole for accessing the voltage output knobe with a screwdriver without the need to open the case.
- The opening for the switch is 9x14.5 mm.
- Make sure to select the top face at the bed. (Place on Face is PrusaSlicer)
As there are a lot of boards out there, make sure that you boarding is having the right dimensions.
--
Use PLA with 0.2 mm height.
The screws I used are 2.5 mm from an old HDD.
This is my first model, so be kind and true! Cheers!