1 / 5
LM2596 and XL4005 buck converter - slimmer — image 1
1 / 5

LM2596 and XL4005 buck converter - slimmer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Updated remix of Teo84's fantastic case, making it even slimmer, print without support and remove heat-set

Rating
4.87 / 5
Likes
378
Downloads
3,125
Makes
52
Views
7,824
Reviews
46

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

2026/03 update:

  • Resize holes so screws can fit and grip better.

  • Added new models for XL4005 and other variants. It's 1mm longer and have different board screw position.

=====

2024/12 update:

Added a new v2024.12 with these changes:

  • Even slimmer (-1.5mm)

  • Now print perfectly without support. (old version needed support for screw holes)

  • Bigger trimpot hole

  • Lower stand-offs to better secure PCB in the case

=====

I really liked Teo84's case, but I think the bottom base is thicker than needed since it need that space to heat set hex nuts. These case don't endure that much physical stress, so I removed it.

Change list:

  • Move bottom half's circuit board holes to fit my board's position

  • Shaved 2mm off the bottom removing space for 2 hex nuts. Board can be fixed in place just fine with metal screw biting into the plastic.

  • Enlarge holes in the top caps to fit the variable resistor easier

  • Make the nut holes in the cap larger so it fit my button-head screws.

Tags