1 / 5
LM2596 and XL4005 buck converter - slimmer — zdjęcie 1
1 / 5

LM2596 and XL4005 buck converter - slimmer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Updated remix of Teo84's fantastic case, making it even slimmer, print without support and remove heat-set

Ocena
4,867 / 5
Polubienia
378
Pobrania
3108
Wydruki
51
Wyświetlenia
7793
Oceny
45

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

2026/03 update:

  • Resize holes so screws can fit and grip better.

  • Added new models for XL4005 and other variants. It's 1mm longer and have different board screw position.

=====

2024/12 update:

Added a new v2024.12 with these changes:

  • Even slimmer (-1.5mm)

  • Now print perfectly without support. (old version needed support for screw holes)

  • Bigger trimpot hole

  • Lower stand-offs to better secure PCB in the case

=====

I really liked Teo84's case, but I think the bottom base is thicker than needed since it need that space to heat set hex nuts. These case don't endure that much physical stress, so I removed it.

Change list:

  • Move bottom half's circuit board holes to fit my board's position

  • Shaved 2mm off the bottom removing space for 2 hex nuts. Board can be fixed in place just fine with metal screw biting into the plastic.

  • Enlarge holes in the top caps to fit the variable resistor easier

  • Make the nut holes in the cap larger so it fit my button-head screws.

Tagi