1 / 7
LM2596 Buck Converter Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
LM2596 Buck Converter Case
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 407
- Makes
- 5
- Views
- 1,695
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Another LM2596 Case. None of the other LM2596 Cases I found quite fitted the Buck that I have, so I created my own.
I made the button pin longer than necessary to allow for "stick out" choice.
Hope it's useful.
I used 4 x M3x15 screws.
Created in FreeCAD.
Ender 3 v2, Generic PLA, 0.4mm nozzle, 0.2mm Layer height.
You'll need to do a little post production clean up of the holes (drill them all out and tap threads in the 4 holes in the base for the cover screws)