LM2596 Buck Converter Tslot,Vslot update
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small case to protect and secure a buck converter. Specifically an LM2596 DC-DC voltage converter. The internal…
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 92
- Makes
- 0
- Views
- 447
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
A small case to protect and secure a buck converter. Specifically an LM2596 DC-DC voltage converter. The internal screw posts will take M2 6mm bolts. May need to be drilled out with a 1/16th drill bit.
Print in PETG to give the clips that hold the lid on some flex and interlayer adhesion.
Remix: Redid the case in Fusion 360 to add another mounting ear to have it secure to two points to reduce twisting. Added a couple other tweaks while I was at it.
UPDATE November 9 2019 - Added a .3MF file with a version of the case with alternate mounting hole positions for LM2596 modules that seem to be prevalent but have flipped holes compared to the original case.
Category: 3D Printer Parts