1 / 6
Vacuum Pump Holder for IKEA SKÅDIS — Keep Your Filament Storage Pump Within Reach — zdjęcie 1
1 / 6

Vacuum Pump Holder for IKEA SKÅDIS — Keep Your Filament Storage Pump Within Reach

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stop losing your vacuum pump between prints. This SKÅDIS clip mount keeps it on the pegboard, always within reach when y

Ocena
0 / 5
Polubienia
3
Pobrania
9
Wydruki
0
Wyświetlenia
58
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Vacuum Pump Holder for IKEA SKÅDIS — Keep Your Filament Storage Pump Within Reach

If you store filament in vacuum bags, you already know the pump is always somewhere it shouldn't be. This holder mounts directly onto your IKEA SKÅDIS pegboard and keeps it right where you need it — visible, accessible, and out of the way.

What it holds

Designed for the small cylindrical vacuum pumps commonly used with resealable filament storage bags (52mm diameter ones). The cradle wraps around the body of the pump and holds it securely upright on the board.

The mount

Uses the IKEA SKÅDIS T- clip system — no screws, no drilling, no tools. One twist onto the board and stays put. The cradle geometry is open at the top so the pump drops in and lifts out in one motion.

Print settings

  • No supports needed

  • PETG recommended — slightly more flex makes the clip more durable over repeated use; PLA works too

  • 0.2mm layer height

  • 3–4 walls for solid clip strength

  • Print in whatever color matches your setup

Compatibility

Designed for cylindrical vacuum pumps of similar diameter to the one shown (52mm). Check the dimensions in the files before printing if your pump model differs.

One less thing on the desk. One more reason to keep the filament dry. Share your make and drop a like

Tagi