MikeLok Mounting Solution
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting solution for LED's and any combination of other things.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a system to use around my shop so that I could attach various lights to different areas and make it scalable.
The first LED mount I made to fit this LED → https://www.aliexpress.us/item/3256806718276656.html?spm=a2g0o.order_list.order_list_main.65.17181802Zorzek&gatewayAdapt=glo2usa
The anchor was to hang a shop light from the roof.
When you slice, you'll see a hole generated for embedding a M2 nut. I haven't managed to get the print to make that the correct size, so I'm currently using a M2x25mm bolt to go all the way through with the nut on the outside. When it gets finalized, I'll add the file here.
This is currently using a M2x25 bolt, washer and nut to hold it firmly in place.
***Downloads appreciated on all platforms***
MakerWorld Model of this -> https://makerworld.com/en/models/2653250-mikelok-mounting-solution
Creality -> https://www.crealitycloud.com/model-detail/69dbf4759c66d5739b14fbb8