Waveshare ESP32-C6 and BME680 Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small friction fit enclosure for the Waveshare ESP32-C6 dev board and their BME680 (or 688) environment sensor.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Designed this enclosure for some Thread environment sensors I was building.
Fits the Waveshare ESP32-C6-DEV-KIT-NX and BME680 - may be compatible with other Waveshare ESP32 boards if they share a footprint, but I haven't looked into it.
I left space behind the boards for wiring or models with headers.
Additionally, the BME68X module can be mounted in either orientation to support both the through-board solder points and the included breakout cable on the other end.
Recommend printing in PETG as I suspect the screw posts would be quite brittle in PLA.
(Edit: have since printed some in PLA and it worked fine)
No supports necessary - for plastics more prone to warping it may be worth adding a brim.
Assembly requires 6 M2 screws and the lid is friction fit - it may require some scaling to account for your printer's tolerances.