Waveshare ESP32-C6 and BME680 Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small friction fit enclosure for the Waveshare ESP32-C6 dev board and their BME680 (or 688) environment sensor.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 211
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Designed this enclosure for some Thread environment sensors I was building.
Fits the Waveshare ESP32-C6-DEV-KIT-NX and BME680 - may be compatible with other Waveshare ESP32 boards if they share a footprint, but I haven't looked into it.
I left space behind the boards for wiring or models with headers.
Additionally, the BME68X module can be mounted in either orientation to support both the through-board solder points and the included breakout cable on the other end.
Recommend printing in PETG as I suspect the screw posts would be quite brittle in PLA.
(Edit: have since printed some in PLA and it worked fine)
No supports necessary - for plastics more prone to warping it may be worth adding a brim.
Assembly requires 6 M2 screws and the lid is friction fit - it may require some scaling to account for your printer's tolerances.