Voigtlander VC Meter Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This lets you mount the VC meter on your strap incase you need the hot-shoe for flash. The meter can be…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This lets you mount the VC meter on your strap incase you need the hot-shoe for flash. The meter can be installed/removed while the holder is on the strap, to do so simply slide half way and slide the vc meter in or out.
Update: New clip has been added for the Peak Design Leash strap.
!!!!!ATTENTION!!!!!
This model was designed to be printed with ABS plastic, you may need to scale down (-0.5%?) if you are printing with other materials.
Print Settings
Printer:
Malyan M180
Rafts:
No
Supports:
Yes
Resolution:
100 Micron
Infill:
15%
Notes:
Printed this with Hobbyking ABS and the meter should fit snuggly. Have not tried it with PLA, you can scale it if need be.
Category: Camera