Yamaha Fairing Grommet 90480-01559-00
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement grommet for side fairings as well as various other applications
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement grommet for motorcycle side fairings, and various other applications
Replaces Yamaha part 90480-01559-00
I lost the one of the grommets while working on my 2017 Yamaha MT-07/FZ-07 (used to hold the side fairing to the center tank cover). I couldn't find one locally so I designed this replacement.
Printed in TPU with 10% infill (approx. 10 minutes). I recommend printing with the larger side facing the build plate, and supports between the top and bottom surfaces. I used the following support settings, but still had to carefully slice through the supports with a razor before removing them because TPU supports are difficult to remove:
Style: Snug
Top contact Z distance: 0.30mm
Pattern spacing: 2.5mm
Interface layers: 2
Interface pattern spacing: 0.32mm
XY separation: 60%
TPU isn't as flexible as the original rubber grommet so it was a little difficult to install, but it does seem work perfectly well in terms of holding the fairing on firmly.