1 / 1
Yamaha Fairing Grommet 90480-01559-00 — image 1

Yamaha Fairing Grommet 90480-01559-00

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement grommet for side fairings as well as various other applications

Rating
0 / 5
Likes
3
Downloads
15
Makes
0
Views
72
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

Replacement grommet for motorcycle side fairings, and various other applications

Replaces Yamaha part 90480-01559-00

I lost the one of the grommets while working on my 2017 Yamaha MT-07/FZ-07 (used to hold the side fairing to the center tank cover).  I couldn't find one locally so I designed this replacement.

Printed in TPU with 10% infill (approx. 10 minutes).  I recommend printing with the larger side facing the build plate, and supports between the top and bottom surfaces.  I used the following support settings, but still had to carefully slice through the supports with a razor before removing them because TPU supports are difficult to remove:

  • Style:  Snug

  • Top contact Z distance:  0.30mm

  • Pattern spacing: 2.5mm

  • Interface layers: 2

  • Interface pattern spacing: 0.32mm

  • XY separation: 60%

TPU isn't as flexible as the original rubber grommet so it was a little difficult to install, but it does seem work perfectly well in terms of holding the fairing on firmly.

Tags