Filmclip version 2 incl film hanger and squeegee
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This version is based on the previous post: https://www.thingiverse.com/thing:3152983 These clips are more robust and…
- Ocena
- 4,75 / 5
- Polubienia
- 101
- Pobrania
- 378
- Wydruki
- 4
- Wyświetlenia
- 2039
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This version is based on the previous post: https://www.thingiverse.com/thing:3152983
These clips are more robust and rigid compared to the previous ones.
There are three versions:
Universal film clip that can be used for 135, 120 and equivalent film.
stl files:
a) film clip universal_1.stl
b) film clip universal_2.stl
The other one is made for 135 film and will hold the film by the sprocket holes.
stl files:
a) film clip 135_1.stl
b) film clip 135_2.stl
The third version is a film hanger than has minimal contact with your film, e.g. suitable if you are treating film strips. You may use it as hanger and/or as a weight (just make it heavier by adding a heavy screw and nut or equivalent). It may look a bit weak bit but, in my hands, the hooks are robust enough to hold a film and a weight.
stl file:
a) film hanger.stl
As a bonus I've provided a film squeegee. Glue the parts together and fit in a mini windshield wiper. You may alter the height of "film squeegee_3" so it holds the wiper firmly.
stl files:
a) film squeegee_1.stl
b) film squeegee_2.stl
c) film squeegee_3.stl
Additional material needed:
For the clips:
- You need the spring from a clothespin to put the two halves together.
- weight, e.g. 16 mm screw/M8 https://www.ebay.co.uk/itm/221301853865
For the squeegee
- Glue Loctite Super Glue
- Mini Windshield Wiper like https://www.biltema.se/bil---mc/bilreservdelar/torkarutrustning/stralkastartorkarblad/torkarbladsats-stralkastare-2000029603
Print Settings
Printer Brand:
MK3
Printer:
Prusa i3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Your choice PETG Your choice
Category: Camera