Filmclip version 2 incl film hanger and squeegee
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This version is based on the previous post: https://www.thingiverse.com/thing:3152983 These clips are more robust and…
- Rating
- 4.75 / 5
- Likes
- 101
- Downloads
- 378
- Makes
- 4
- Views
- 2,039
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
This version is based on the previous post: https://www.thingiverse.com/thing:3152983
These clips are more robust and rigid compared to the previous ones.
There are three versions:
Universal film clip that can be used for 135, 120 and equivalent film.
stl files:
a) film clip universal_1.stl
b) film clip universal_2.stl
The other one is made for 135 film and will hold the film by the sprocket holes.
stl files:
a) film clip 135_1.stl
b) film clip 135_2.stl
The third version is a film hanger than has minimal contact with your film, e.g. suitable if you are treating film strips. You may use it as hanger and/or as a weight (just make it heavier by adding a heavy screw and nut or equivalent). It may look a bit weak bit but, in my hands, the hooks are robust enough to hold a film and a weight.
stl file:
a) film hanger.stl
As a bonus I've provided a film squeegee. Glue the parts together and fit in a mini windshield wiper. You may alter the height of "film squeegee_3" so it holds the wiper firmly.
stl files:
a) film squeegee_1.stl
b) film squeegee_2.stl
c) film squeegee_3.stl
Additional material needed:
For the clips:
- You need the spring from a clothespin to put the two halves together.
- weight, e.g. 16 mm screw/M8 https://www.ebay.co.uk/itm/221301853865
For the squeegee
- Glue Loctite Super Glue
- Mini Windshield Wiper like https://www.biltema.se/bil---mc/bilreservdelar/torkarutrustning/stralkastartorkarblad/torkarbladsats-stralkastare-2000029603
Print Settings
Printer Brand:
MK3
Printer:
Prusa i3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Your choice PETG Your choice
Category: Camera