Counting matching models…
A holder to support an expansion adaptor for developing designs for microcontrollers. This stand keeps the expansion adaptor from scratching the work surface and pins from shorting to each other. Fits boards that are 70X90 mm such as:…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for PETGSource material: PET
For the Get creative with WAGO contest I thought it would be cool to have a case that houses a d1 mini esp8266 development board and Wago connectors to do the test setup instead of a breadboard. You need to print the following files:…
Introduction: This is the 'DumbBot', a 4 wheeled, Rear Wheel Differential Drive robot made for Artificial Intelligence (AI) applications. Inspired by the robots from the AI Tool Kit (AITK) this project seeks to implement a real-world…
A 2 part shell style case for the flipper zero wifi development board. The tolerances are very tight, some mild post processing is to be expected primarily on the bottom half of the shell. Everything should fit nice and flush. Required…
a 3D printed TPU Pitot tube mount for a REMOVE BEFORE FLIGHT tag. I made this for my RC VTOL using Arduplane 4.3 Enjoy !, Dave
This machine is designed for Jobo 1520 film development tanks. Additionally to the printed parts you need: 1x power supply - 24V / 6A (or what your motor needs) 1x nema 23 stepper Motor 3nm 1x nema 23 motor l-mount 1x motor mount 8mm 1x…
Halterung für zwei Filament-Spulen am 40x40 Profil Dieses Projekt hat das Ziel, eine flexible und modulare Halterung zu entwickeln, die an einem 40x40 Aluminium-Profil eingehängt werden kann. Sie soll zwei Filament-Spulen aufnehmen und…
Case for a CC2538-CC2592 development board module. These are Zigbee modules which I use to control my lights, thermostats and other stuff. They offer great range and can be found on Aliexpress for 20-30 dollars. I printed this without any…
This is a development tray I modeled. While this is 100% modeled by myself I have to give credit to BV3D Bryan Vines and tonyrod on thingiverse for design Ideas. This is heavily influenced by Bryan Vines design from 2019. Bryan if you…
This is a updated enclosure for a ESP32 and development board. It has a snap fit lid, And the board screws into place. I made it to house my WLED controllers. It has wire guides around it also and a screw in place clamp if needed
Modular Electronics Mounting System Tired of messy electronics projects with loose components and tangled cables? This modular mounting system was designed to create clean, organized and expandable electronics setups for prototyping and…
Update: New Adjustable holder to fit all kids of boards are in the files! not required but recommend a rubber band around the adjustable holders to help with placement( shown in photos) Currently working on holders to fit other…
Coralboard Demo Case — Ventilated Enclosure & Desktop Stand Overview The Coralboard Demo Case is a practical, 3D-printable enclosure concept designed to protect a small development board and integrate it neatly into a desktop project or…
Summary This is a case for a EC Buying STM32H7 development board. The part number on board is FK723M1-ZGT6 V1.0. Purchased Parts The board was purchased from Amazon , but looks to be available on AliExpress, etc. as well. Qty 4 - M3.0x6mm…
For the Get creative with WAGO contest I thought it would be cool to have a case that houses a d1 mini esp8266 development board and Wago connectors to do the test setup instead of a breadboard. You need to print the following files:…
This QD Sling Point Mount Development Kit is a CAD-ready model of a Push-Button "Quick-Detach" spec socket that can be quickly adapted and customized to mount compatible swivel mounts to virtually anything. Originally designed for a nerf…
This is a updated enclosure for a ESP32 and development board. It has a snap fit lid, And the board screws into place. I made it to house my WLED controllers. It has wire guides around it also and a screw in place clamp if needed
https://cad.onshape.com/documents/dff0a0ab8504a64952909e86/w/279a00eb4bf456745123b855/e/f8b8ea266391a291eca15c8b?renderMode=0&uiState=69a44cd18d82e5f4f306b781
Remix of an Arduino Uno stand by tonyrod on thingiverse. I modded this years ago and figured I share here on Printables in case it was of use to anyone. License type matches license of original model
This is a development tray I modeled. While this is 100% modeled by myself I have to give credit to BV3D Bryan Vines and tonyrod on thingiverse for design Ideas. This is heavily influenced by Bryan Vines design from 2019. Bryan if you…
我们使用高精度 3D 扫描仪对 CR-Scan Raptor 进行了细致的扫描，创建了精确的 3D 模型。此模型旨在帮助开发人员和工程师更好地设计和制造 CR-Scan Raptor 的各种配件。通过这个详细的 3D 模型，您可以彻底了解设备的各个方面，为配件开发提供坚实的基础。立即下载并开始您的创新之旅！
I made a fun modle of developmental game. Game Instructions: 1.The modle requires two colors of rollball. 2.Assemble it according to the pictures. 3.Shuffling the colors of rollball. 4.Using the sliding block to arrange the colors of…
Case to hold your 3.5" TFT Arduino screen
An enclosure for the LILYGO Meshtastic T-Beam ESP32 TTGO Development Board with LCD and rear mounted 18650 battery mount. Requires four (4) 16mm M2 screws. OpenSCAD file requires BOSL2 (https://github.com/BelfrySCAD/BOSL2) and nutsnbolts…
This is a compact enclosure for GLYPH Development , Specifically for C3 & H2. Recommended : Material : PLA / ABS Layer Height : 0.2mm Support : Not Required (but for some printer use support on 90degree overhangs)
Gizmonic Institute - Research & Development License Plate Frame, MST3K Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 25 Category: Signs & Logos
A small inconspicuous case for a ESP8266 NodeMCU Development Board v2. Could be used in conjuction with a TTL IR transceiver-head to read Smart-Meters. For the IR transceiver head you could build your own or just buy a cheap one from…
Quick design I made for gifts. Printing should be extremely simple, though may need to adjust slicer for the text serifs. The “tall” model has the image/text raised much higher from the base. Also included is a project file for a fridge…
Warning this has not yet been tested. Printed, but not tested. Currently developing the idea. Appreciate any input. Print with honeycomb infill, 0 top and bottom layers.
This is inspired by Gridfinity Generic DevBoard Holder . I didn't need the half grid base, which slows printing time, and the tallest bin there is 3 Gridfinity units, which doesn't work for boards that have stacking headers, or breakout…
The seal on my garage door is broken due to rodent damage. The vole feels like it's on patrol at the same time every day and it's time to do something about it... I've got a quote for replacing the seal, but I'm going to try to do it…
**In development This is a little device I created for those little bits of extra soap. Now you can compress them into a new bar. Screw in the bottom, place all those little bits of soap, add some hot water and compress. Once you are…
Spring Generator especially sim racing pedals. Print with support. I recommend PETG filament for durability and flexibility. You can adjust, thickness, density, radius, height etc.
A compact tool designed to simplify loading 35mm film onto Paterson development spirals. Ensures smooth, frustration-free loading without damaging the film. Quick to print and easy to use—perfect for analog photographers!
Design symbolizing developmental psychology with the outline of children within an anatomical brain.
This Picatinny Rail Seed Development Kit is a CAD-ready model of Picatinny-spec rail that can be quickly adapted and customized to virtually any length or style. The model isn't a usable tactical rail without modification, but it…
These Flared Magwells Development Kit are CAD-ready models of short dart mag-compatible flared magwells that can be quickly adapted and customized to other blasters or mod parts. The model isn't a usable flared magwell without…
This Picatinny Receiver Development Kit is a CAD-ready model of a Picatinny-spec rail receiver that can be quickly adapted and customized to mount virtually anything to your blaster. The model isn't a usable tactical rail receiver without…
Summary This is a case for a EC Buying STM32H7 development board. The part number on board is FK723M1-ZGT6 V1.0. Purchased Parts The board was purchased from Amazon , but looks to be available on AliExpress, etc. as well. Qty 4 - M3.0x6mm…
A stand to hold your GIGA R1 WiFi with display so you can see the screen while you write and test code.
The Model is printed on a creality Ender v1 in white Pla, infill should be 40-50%. with support. Components: Arduino Giga R1 Wifi Arduino Giga Display Arduino Giga Camera. UC-A67 Micro SD Pmod Module Rgb Module Digital 18x14mm Wifi…
Very early, idea state! Only wind guides and concept pics shown. . Early impression, not usable now. Step files are placeholders w/o real function. Concept: Air drying through an Peltier element. The element works as air cooler (for…
The backplate has two options either a fan or vent slots. Made with Solidworks - I'm new at it, so just got it to a point where it works. I've uploaded the source so you can tweak it if need be. Printed with CR10 V3 - Cura PETG 0.2 Layer…
I will continue to upload files as I modify the rest, howeveer for now it just has the buster sword. make sure you download the right files, they are named and made specifically
This little adapter lets you use an Altera chip socket for testing SNES CPUs and PPUs. Print with PLA to get a clean, precise component. PETG and ABS do not print cleanly enough for this as it is very specifically sized and shaped. The…
A 3D printable case for KIISU Development Board V4A by Rainwalker. A fun credit card sized development board that is compatible with Flipper Zero firmware and features some additional sensors and functions. Learn more about KIISU:…
KIISU Kitty Keychain Learn more about KIISU: https://kiisu.io For commercial use: Cults3D ___ Follow on Social Media @planmarks Website: https://planmarks.eu Support by PayPal https://www.paypal.com/donate/?hosted_button_id=EA4R2NXW5LM7E…
KIISU 8Bit Keychain Learn more about KIISU: https://kiisu.io For commercial use: Cults3D ___ Follow on Social Media @planmarks Website: https://planmarks.eu Support by PayPal https://www.paypal.com/donate/?hosted_button_id=EA4R2NXW5LM7E…
KIISU Development Board 8 Bit Ring ___ Follow on Social Media @planmarks Website: https://planmarks.eu Support by PayPal https://www.paypal.com/donate/?hosted_button_id=EA4R2NXW5LM7E Support with ETH…
KIISU Development Board v4a Mockup for addon and accessory design Learn more: https://kiisu.io ___ Follow on Social Media @planmarks Website: https://planmarks.eu Support by PayPal…
This is a very stable, upright display stand for the Altera Cyclone V FPGA development board.
The Hare Tech Diana 2025 Muzzle Development Kit contains CAD-ready models of threaded muzzles for the latest updated edition of Hare Tech Diana Brushless Flywheeler. The model isn't necessarily a usable muzzle without modification, but it…
Stapeldorn für Paterson Entwicklungsspiralen damit diese nicht im Schrank herumfliegen. In vier verschiedenen Höhen für zwei, drei, vier oder fünf Spiralen. In zwei verschiedenen Designs, eine oben geschlossen und mit Infill zu drucken,…
Modularer Stapeldorn für Paterson Entwicklungsspiralen damit diese nicht im Schrank herumfliegen. Der Stapeldorn kann mit verschieden langen Segmenten beliebig lange oder kurz zusammengestellt werden. Bestehend aus einem Bodenteil, einer…
Zentralrohr als Ersatzteil für den Paterson Entwicklungstank mit zwei oder drei Spulen. An der Unterseite ist Stützmaterial erforderlich. Die zwei Mitnehmerlappen im inneren des Rohres erfordern kein Stützmaterial. Achtung! Darauf achten,…
Encases the AZ OneBoard development board, while exposing all expansion slots, enabling heat dissipation, and leaving plenty of room for bulky micro USB connectors for power and programming. The push button is accessible as well when…
MaciaT's developing tank worked really fine for me. It printed watertight in ABS+ without any acetone smoothing. But I had difficulties loading the film in the dark. A comparison to an old spiral showed that the grooves used to be much…
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
A small thin case for for the Kiisu v4. See https://kiisu.io/ for more information about this board. less than 90 x 58 x 8 mm without the lanyard/keychain part Uses the acrylic piece that ships with the dev board No hardware, snaps…
Zentralrohr OHNE Mitnehmer für den Paterson Entwicklungstank mit zwei oder drei Spulen. Durch die fehlenden Mitnehmer kann ein Schlauch oder Trichter besser / tiefer eingesteckt werden. An der Unterseite ist Stützmaterial erforderlich.…
Desk development For download: 230V plate designed for industrial socket 50mm Bannan plug plate for regulated output 0-24v from Ruideng RD6006 and 24V output Switch plate for switch 11x26 mm Plate for speaker 120mm Plate for Solder Sequre…
I updated this per request of a Printables member for .270 WIN. I designed this for my 6.5 Creedmoor, but it will fit many cartridges with a head diameter of 0.473" (12.04mm). It is designed for the projectile pointing down, into the…
this is a model to enable the home development of super 8 motion picture film. it holds a single cartridge (50 ft) of super 8 film emulsion side out in 3 layers. printed in transparent material enables fogging using LED strip lights…
this is a reupload of a design by mb_maker on thingiverse with a few alterations, it is an adaptable super 8, standard 8 and 16mm development tank. i have designed my own super 8 tank here :…
The Tray Development Frame (TDF) serves to protect 11x14 negatives from scratches during tray development. It forms a spacer between the tray base and the film, ensuring that the second coated side of sensitive X-ray films, for example,…
KickPi K2B Case w/ 40mm Fan This is a case for the KickPi K2B Development Board: https://www.kickpi.com/product/k2b/ which is available from Amazon here: https://a.co/d/7kwtqUZ (Price fluctuates. I bought mine @ $26.59 USD, FYI)…
I shoot and home-develop a lot of different film formats, and try as I might I couldn't find a reel/holder for Disc films, so I designed one that it working really well for me. This reel/holder is designed to hold up to three disc films…
Just a basic bottom cover for ESP32-C3 for development extension board to protect both your table from scratches and your board from shot circuits in case of occasional touch with metal or any other conductive surface. See also other…
esp32-s3-touch-lcd-1.85c-box holder
I basically just took the original model and made it fit my larger antenna. After that I just kept making small changes until I was happy with it. Everything fits really well now and looks a little bit neater. I wanted something with the…
I shoot and home-develop a lot of different film formats, and try as I might I couldn't find a reel/holder for APS films, so I designed one. This is the result. Oh, and if you are looking at this, I'm sure you've realized that APS film…
Simple round center cap replacement for Toyota Tundra. Add a pause at 8th layer to change visible letter color to background colors. Print lettering down with supports.
Using a cup requires both fine and gross motor skills. This cup was designed for a child(in particular our child) to develop those motor skills. For my application (yours may be different) it was paired with small, soft objects of various…
This is a simple enclosure for a ESP32 and development board. It has a snap fit lid, And the board snaps into place. I made it to house my WLED controllers
This is a simple enclosure for a ESP32 and development board. It has a snap fit lid, And the board screws down into place. I made it to house my WLED controllers. The screws I used are M1.7*5. I changed my original design that had a snap…
Case for 18650 battery powered ESP32 devboard Category: Computer
This QD Sling Point Mount Development Kit is a CAD-ready model of a Push-Button "Quick-Detach" spec socket that can be quickly adapted and customized to mount compatible swivel mounts to virtually anything. Originally designed for a nerf…
Join the printsbyjayy discord server: https://discord.gg/X9VbhrDzzM This is a project that was originally posted on thingiverse that is now being cross posted to printables. Edit 11/2/24: This is an older box. A newer revision of the box…
I shoot and home-develop a lot of different film formats, and try as I might I couldn't find a reel/holder for Disc films, so I designed one that it working really well for me. This reel/holder is designed to hold up to three disc films…
https://cad.onshape.com/documents/dff0a0ab8504a64952909e86/w/279a00eb4bf456745123b855/e/f8b8ea266391a291eca15c8b?renderMode=0&uiState=69a44cd18d82e5f4f306b781
Free for all. Engineered for performance. Let’s mine silent. ⚠ Experimental Status Use the gasket (Printed in PLA or PETG) to verify the alignment of the holes. And let me know if something needs to be changed! I have used this model:…
Free for all. Engineered for performance. Let’s mine silent. ⚠ Experimental Status Use the gasket (Printed in PLA or PETG) to verify the alignment of the holes. And let me know if something needs to be changed! I have used this model:…
Remix of an Arduino Uno stand by tonyrod on thingiverse. I modded this years ago and figured I share here on Printables in case it was of use to anyone. License type matches license of original model
Using: 20x40x400mm profile - X2 20x40x500mm profile - X2 M3 - ? M5 - ?
just a little mount that can be taped on a surface. Using two small 2mm brass inserts and 2mm screws. Pretty quick and eazy. Category: 3D Printing
This M-Lok Compatible Slot/Rail Seed Development Kit is a CAD-ready model of Picatinny-spec rail that can be quickly adapted and customized to virtually any length or style. The model isn’t a usable tactical rail without modification, but…
Raspberry Pi Development Bench This model is a simple base plate designed to hold the Raspberry Pi 2,3,4 and two breadboards. It allows the developer to have a fixed station in which they can experiment and move around without having to…
Started with Spiritdude's case design, lengthened it and moved the usb port to align. Print Settings Printer Brand: Anycubic Printer: Large Size Chiron Rafts: No Supports: Yes Resolution: .016 Infill: 20 Filament: IIID PLA+ White…
I designed this adapter to accept the SP-445 4x5 film developing tank for use on the B's rotary processor. I have not tried this method out yet and I have no idea if the tank is amenable to rotary processing or not, so use at your own…
I streched the model for connecting the antenna
diymore ESP32 and LCD Development Board cases Not sure if they are of use to anyone else as I don't know how popular these boards are, but I've been having fun making some small desk gadgets and needed cases to hold the electronics. There…
I couldn't find any existing models so made this dispenser to peel and hold Noritsu / Fuji style twin check stickers. I actually use these to keep track of my film from shooting, through development to archive. The roll sits on the holder…
I couldn't find any existing models so made this dispenser to peel and hold Noritsu / Fuji style twin check stickers. I actually use these to keep track of my film from shooting, through development to archive. The roll sits on the holder…
![Novoferm floor seal [under development]](https://media.printables.com/media/prints/1107980/images/8411425_950900d9-2414-4261-8dcf-099af41967cb_a549a519-02a5-4464-bebb-10f1dce75b38/screenshot-2024-12-18-230806.png)
![Spring Generator [UNDER DEVELOPMENT]](https://media.printables.com/media/prints/1132850/images/8546451_37a82912-1e73-40af-acc4-e20e96970885_9653d52e-eeda-4d92-8454-4cfc79dab171/screenshot-2025-01-03-201405.png)
