1 / 3
IKEA PS 2014 lamp scissor pins — zdjęcie 1
1 / 3

IKEA PS 2014 lamp scissor pins

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement pins for the scissor hinge on the IKEA PS 2014 lamp

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
59
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My brother had the pins in his IKEA PS 2014 lamp break, so he sent me a few pins and I created these replacements for it. 

I suggest using brim and normal supports to print these. Don't print them upright or they will snap, print them on the side where the flat areas are provided for the supports. I used a layer height of 0,08mm and it turned out fine.

These should fit as they are, otherwise scale as needed.

Tagi