microRACK - ESP32 Module for Nerdminer Cluster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact ESP32 holders that dock into a microRACK track. It can hold clusters of 4, 6 and 8 ESP32 boards.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Custom slot loaded ESP32 holders that slide into a track module designed to hold 4, 6 and 8 ESP32s. This module is for use with the microRACK homelab setup. This was designed ot experiment with Nerdminer however it's intended for any applications where you need to have multiple ESP32s running in your homelab.
REQUIRED:
You will need to print the microRACK track to mount this module.
microRACK was designed to solve a problem of building a homelab in limited space with maximum versatility. It's follows standard rack spacing with each module being 1U (approx. 44mm). The modules are fastened to the track using standard servers rack screws sizes. Each module has a tab that secures it into the track, once the screws on the front are attached the module is locked in place. The tracks can be mounted on any surface horizontal, vertical or upside down and it will hold the modules securely in place.
Printing in PETG is recommended.