PC Fan Guard (Grill) (Grille) - 120mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
120mm PC fan guard
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
*This is an old model I made and uploaded to Thingiverse 3 years ago
Have built my own Unraid server and have so many hard drives in the case I needed more cooling so have cut some holes in the side panels for 120mm fans but needed some guards to protect fingers on the outside and wires on the inside.
I looked at some other designs but went with my own as the print time is only 38mins (Cura estimate) compared to 3x that for some others I found online.I printed using a 0.6mm nozzle on my Ender 3v1. My Cura settings are based off those by Maker Steve - https://makersteve.com/2018/08/22/speed-up-your-printing-by-going-with-a-bigger-nozzle-0-6mm/
I just loaded the file in Bambu Studio and its over 10 minutes faster to print on my P1S with a 0.6mm nozzle or if using the stock 0.4mm it would be around 32mins.