PC Fan Guard (Grill) (Grille) - 120mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
120mm PC fan guard
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 50
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
*This is an old model I made and uploaded to Thingiverse 3 years ago
Have built my own Unraid server and have so many hard drives in the case I needed more cooling so have cut some holes in the side panels for 120mm fans but needed some guards to protect fingers on the outside and wires on the inside.
I looked at some other designs but went with my own as the print time is only 38mins (Cura estimate) compared to 3x that for some others I found online.I printed using a 0.6mm nozzle on my Ender 3v1. My Cura settings are based off those by Maker Steve - https://makersteve.com/2018/08/22/speed-up-your-printing-by-going-with-a-bigger-nozzle-0-6mm/
I just loaded the file in Bambu Studio and its over 10 minutes faster to print on my P1S with a 0.6mm nozzle or if using the stock 0.4mm it would be around 32mins.